Sewing Project - Front Zipper Pouch

I made another bag the other day.  I wanted to give the Front Zipper Pouch a try.

I chose this beautiful floral print in cotton.

I chose ivory thread and a taupe zipper.

I added a layer of flannel for a bit of padding.

The lining is gorgeous navy microfiber fabric which will wear well.

The cotton outer layer was cut 9 3/8 inches x 23.25 inches.  The flannel was cut 9 3/8 inches by 21.75 inches long.  The zipper is a 9"/23cm one.

The flannel was quilted to the cotton with the curvy decorative stitch vertically along the full length. 

I made a wrist strap by cutting a length of the cotton outer fabric, folding it in half then in half again and top stitching both sides. Finished it measures 4 inches long.

Then I inserted the zipper on the short end between the outer and the lining.  Now, I have a tube with the zipper inserted.  It was a matter of deciding where the zipper would be placed. I could be at the very top or some where along the top third of the pouch. I chose 2.5 inches down from the top fold. Once decided, I pinned the side seams right side out, added the wrist strap above the zipper and stitched about 1/8 inch from the edge then turned inside out and sewed the side seams at generous 1/4 inch to enclose the first seam inside. Turned it right side out.  Pressed really well.

I added a metal charm on the zipper pull so that it would be easy to open and close.

Note: I should cut the flannel from the sides seams as they are quite thick.  I was planning on doing some stitching on it but I have not come up with an idea that seems to fit so I will pondering it over the next few weeks.

Finished size is 8" wide x 11" inches tall.