Cardmaking - Houses

I made a slow stitching card.  Very time consuming but relaxing.

I started with the beige background fabric. 

I created the body of the house with 2 pieces of paisley fabric. Then stitched it to the background.

After aligning the chimney to edge the house body I stitched it on before the roof.

I added the roof in olive green fabric.

I added the window and the door. 

Then I added the smoke and the bird in the sky and the green grass base at the bottom.  I used gold sewing thread. 

I mounted it to a Kiwi Kiss card base with some strategically placed stitches in the four corners of the card.  This card has a half sheet insert to cover the stitching on the inside of the card. White insert and envelope.

I used some watercolor paper I made a while back.

Using the house thinlits I cut the bright watercolor paper. I then cut a chimney by hand. 

I cut a Baja Breeze house in a smaller size. 

I designed a greeting which I trimmed to leave a small border when adhered to the blue layer.

I chose a deep yellow card base onto which the layers were adhered.

White quarter sheet insert and envelope.

I drew a house which I printed on watercolor paper. 

I watercolored it with Stampin Up Watercolor Wonder Crayons. Blue house, brown roof, red chimney, yellow windows, green door, flower boxes, a bush out front and a stone walkway.

The extras were drawn with my fine tip black Sharpie marker.

Trimmed to leave a small border on an A2 card base.

Adhere to the dark green card base.

White quarter sheet insert and envelope.

I started with a Tempting Turquoise A2 card base.

I cut the middle layer from a piece of watercolor paper I created a while ago.

I cut the white layer with the next size house thinlit.

I glued the chimney cut from an extra piece of the same watercolor paper to the back of the white layer on the right hand side.  Then adhered that to the card front.

I then distressed the watercolor paper with a bit of sand paper and then glued the greeting on top of it.

This was then adhered to the white layer.

A white quarter sheet insert and envelope.

Cards - A2 - Scraps on my desk

The card base is dark brown textured cardstock.  

I cut a piece from a scrap of this gold and kraft polka dot card stock to leave a small border and adhered it to the card front.

I glued a strip of the card base card stock across the front aligned to the top.

I cut a bird on a branch with the Tim Holtz die and adhered it on with Scotch Quick Glue.

I used a gold sharpie marker to add an eye to the bird and some marks on the cardstock strip and branch.

A white insert and an off white envelope.  Yeah!

I chose a Stampin Up Kiwi Kiss card base for this card.

I cut a piece of SU designer paper which was just begging to be colored.  I used some Prismacolor pencils to color the main flower and the surrounding leaves.  I left the lilies white.

This layer was adhered to the card front with double sided tape.

Really simple but effective.

A white insert and envelope and another hits the stash.

Another Kiwi Kiss card base with a totally different card front.

The designer paper is a leftover.  I cut the layer leaving a small border then I cut it again and turned over the small piece to show the script back side.  I taped these together with clear tape.  It was adhered to the card front.

I added a narrow strip of dark brown cardstock over the join.  

I cut a bird on the branch again this time in Baja Breeze and used quick dry glue attached him along the strip.

A white quarter sheet insert and a matching envelope.

A cute baby card.  I painted this little bear a few weeks ago for my Macro Monday challenge on Flickr. 

I turned it into a card.  I trimmed it to the 3x3 size which is the limit for MM.

I layered it onto dark brown cardstock leaving a nice border.

I mounted it onto a Baja Breeze card base.

Dug into my stash of greetings and added this 2" oval punchie mounted with 3D foam tape.

Added a quarter sheet insert and an envelope.

 

Cards - Watercolor Abstract

I wanted to add some cards to my stash so I chose to reuse the bright watercolors I created in this post.

I cut the watercolor art into pieces.  In this card 4x5.25 inches.  I then used a Micron fine black marker and outlined the shapes in the watercolor.

I followed the idea of neurographic art and rounded the intersections of the black lines.  I added a border all the way around. Added circles to some of the white dots.

I used a black marker to darken the edge of the watercolor paper.

Mounted on Stampin Up Island Indigo card stock with a quarter sheet insert on the inside paired with a white envelopee.

For this card I cut the watercolor art to 3.5 inches square.

Again, added black marker lines around the shapes in the watercolor.  Soften the intersections and circled some of the dots in the art.

Added a black border all the way around.

I mounted it leaving even edges around 2 side onto a SU Gumball Green A2 card base.

Added a white insert and envelope.

This one had a good variety of colors so there was a good choice of colors for card base.

In this card, I chose SU Pacific Point in the A2 size.  These I did mount all in the portrait orientation but they could be landscape (wide) as well.

I love the bright spot of pink in this piece of watercolor. 

Again, black marker to outline the shapes in the watercolor with a border all the way around.

A white quarter sheet insert and envelope.

The card base on this card is an A2 in the SU Kiwi Kiss color.

The watercolor was cut to 3.5 inches square.

Mounted to the card front with double sided tape.  I added white quarter sheet insert and an envelope.

Pressed under books over night and is now sitting in the box.

These were fun to do and allowed my art to shine again.

 

Cards - Christmas Cards - Trees

I have done these colorful trees on a smaller scale before.

This is an A2 card in landscape orientation.

The bottom of the card is wet with clear water and then you paint your trees above wet on dry until at the bottom you reach the puddle of water you laid earlier.

I did work out how to print the greeting on the bottom of the watercolor panel.

This is Taken with Teal with a seasonal insert and white envelope.

I think these trees are a bit too far apart but at least they are green.

The black greeting printed on the panel with the printer before mounting to card front.

Mounted on a Kiwi Kiss card base with a seasonal insert and white envelope.

Not sure how well this color works but there it is!

Black printed greeting on the watercolor panel.

Card base is Island Indigo with a seasonal insert and white envelope.

Christmas Cards - Arched Joy

Here are my first Christmas Cards for 2023.  I generally do a Christmas Card Challenge but it did not happen this year.

I used the TH Arched Frame die into which I placed the TH Joy Mover and Shaper die.  Running this combination in the Big Shot with the striped designer paper I got my main element.

I chose a designer paper with a variety of colors which allowed my to use several colors of card stock.  Top left - Handsome Hunter, top right - Tempting Turquoise, bottom left - Kiwi Kiss and bottom right - Island Indigo.

The Joy is visible against the darker card stock.   

I printed the words "to the World" on white card stock in coordinating colors and trimmed them to .75" tall and then cut the left hand end into a banner by hand.  This was mounted to the card with 3D foam tape aligned on the right hand side. 

I added a quarter sheet insert and a white A2 envelope.

Sympathy - Tragedy strikes

This card is for my aunt who lost her granddaughter in an airplane crash this week.

The young lady had moved to California with her husband.  She had just finished her education.  Due to COVID she had not been back to visit and now it will not happen.

She was 33 years old with her life in front of her.  It is very sad.

This is one of my photographs with a filter applied to create a black and white stylized evergreen branch.  Printed on heavy card stock, trimmed to leave a small border and mounted to the front of a Kiwi Kiss card base.

I used a Modern Label punchie with a color printed greeting. Chalked with green to coordinate and mounted with 3D tape. 

Exchange Cards - May

I started with the focal element which is a sticker.  I found these in a book I was clearing out the other day.  Who knows how long they were there!

I adhered it to a piece of bright green card and trimmed to leave a wide border.  I chalked the edges with black.

I chose a bright turquoise card and added an embossed light blue layer.  It was embossed with a Cuttlebug folder and adhered to the card front leaving a small border.

I added the black accent strip aligned to the left of center.  The sticker accent is mounted with 3D foam tape.  I added a Modern Label punchie greeting with offset green card stock.  It was also adhered with 3D foam tape.

I will mailing these today.

This card is similar in as the first one.  I laid it out in landscape format.   The sticker got a light blue layer behind.

I chose a bright green card this time and added a Swiss Dots embossed light blue layer. 

Once the black strips were adhered I used 3D foam tape for the sticker accent.

I added a round greeting layered onto the same green card stock as the card. I just tucked it under the corner of the accent.

Christmas Card - Merry and Bright

I am working on May's Christmas Card challenge - large greeting.  I thought I would force myself to use this 'merry' die cut - Poppy Stamps - MAGNIFICENT MERRY die cut.  I have been working on ideas for several days and nothing is gelling.  This card is what I have so far but I think it 's missing something.

I cut it from red card stock.

I selected this striped red and green designer paper and cut it to leave a small border and adhere it to a Kiwi Kiss card base.  I have no credits for the paper.

I glued the 'merry' towards the top of the card. I added a black ampersand cut with the Cricut and the Base Camp cartridge at 1.25".  I cut the BRIGHT from silver non shed glitter paper with the Stampin Up Little Letters thin lits.  I aligned them towards the bottom of the card.  All these pieces were adhered with Scotch quick dry adhesive.

I added an accent of stars on the left in black, red, and silver all held together with a tiny red brad and adhered to the card front with 3D foam tape.  Stay tuned for another iteration.

Update: I decided overnight that it needed some black. Here's the updated version.

I think adding the star streams has saved this card.  I used a ruler and just aligned it along the Vs in the silver star and made markings to the edge of the card.

I am quite happy with it now. 

R2Go Christmas Card Kit - Red Felt Ornaments

I created a Ready2Go Christmas Stack kit today.  I started with the felt ornaments.  I selected the snowflake, the reindeer and the tree. 

I then selected warm designer paper with red in the pattern.  Then coordinating card base was selected. I adhered the designer paper to the card front leaving a small border.

I added some 1/8" gold metallic ribbon in the ornament hanger. A glitter star brad holds the ornament to the card front. I cut some gold moire paper with the 2.75 inch Spellbinder Nestabilities in smooth circles. Then I aligned that gold layer between the red ornament and the designer paper then glued it down.

I designed a greeting for the Stampin Up Artisan Label punch.  The greetings are coordinated with the card base color.  Adhered with 3D foam tape.


The card above details are as follows:

• Snowflake Red Felt Ornament
• Blue Fern Studios - Paisley & Vine - Bohemian Designer Paper
• Warm blue card base
• Greeting in Marina Mist

The card on the right as follows:

• Reindeer Red Felt Ornament
• Authentique - Tradition - Customary Designer Paper
• Bright warm green card base
• Greeting in Kiwi Kiss 

The card on the right as follows:

• Tree Red Felt Ornament
• Designer Paper by Anna Griffin
• Pinecone cardstock by Bazzill
• Greeting in Early Espresso

The kit has been added to the R2Go Stack Kit page.

I have several stack card classes coming up so that will provide the participants with a choice of kits.

Tea for Two

I started with the sentiment which I had printed and embossed when I made my other tea card.

I chose to make it a Stampin Up card so I decided on Night of Navy, Old Olive as a color scheme. The sentiment is printed in Old Olive and is from the Tea Shoppe Stamp Set. It was clear embossed on the vellum.
I created a piece of background paper with the Tim Holtz Distress Stain - Crushed Olive mostly and a bit of Mustard Seed.
I cut a piece of Kiwi Kiss card stock into a large banner and adhered that to the front of a Night of Navy card. Then I trimmed the back ground paper and the vellum to leave small even borders on each of those.
I printed a cup from the Tea Shoppe Stamp set on Whisper White and fussy cut around the image with scissors and an exacto knife.  I adhered it above the sentiment with 3D foam tape.  I then placed double sided tape behind the cup and adhered the vellum to the background paper.  Now, I adhered the background layer to the Kiwi Kiss banner.
I measured the center and a point on each side which I punched out the side ones with a 1/8 inch hole punch. I cut a length of Night of Navy Tafetta Ribbon and tied it in a knot above the cup.

Submitting to the Coffee Loving Cardmakers Spring Blog Hop. 

SU Book Party Thank Yous

The box arrived today!!  New toys to play with.

These are the cards I made for the ladies who placed an order at my Stampin Up Book Party a couple weeks back. Here's the make and take tags we made.

This is Kiwi Kiss card stock onto which I added a layer of white.  I then selected a sheet of designer paper from the Good Morning Sunshine (retired) set.  I cut the paper into 1" strips and placed three across the tall card.  I used the greeting from the Eventful Year set and color printed it in Kiwi Kiss with a black border.  I then cut them out with the rectangular framelit from the Apothecary set.  I attached the greeting with 2 tiny black brads.  Wrapped a length of black 1/4"grosgrain ribbon below the greeting and taped to the back of the white layer.  Added a short length and knotted it and trimmed the ends.  I trimmed the strips of DSP at a slant by hand with scissors. This layer was then adhered to the card front.

R2G Card Kit - For You Scallop - Orange & Purple

Another card kit for my upcoming class.  This is similar to this one.  I chose Pumpkin Pie and Elegant Eggplant for this kit.  The For You flowers are color printed and punched with the 1 1/4" punch.  A layer of Kiwi Kiss at 1 3/8" then the scallop punch in the card color.  I used the SU Pretty Print embossing folder on the bottom 2/3 of the white layer. Put the 1/4' ribbon across the top and taped the ends to the back.  Adhered it to the card front.

 Assembled my greeting accent by gluing the small circle to the medium circle then to the scallop circle. This greeting accent is then adhered to the card front over the ribbon with 3D foam tape.

This one on right is Ruby Red and Elegant Eggplant with Kiwi Kiss .5 inch ribbon.

Challenge - Off the Edge & C4C187

I started with a heavy white card which I splattered with Kiwi Kiss ink on a wet foam brush.  I dried it with a heat gun.  I had colored the large middle HMP flower with the same Kiwi Kiss ink and dried it with the heat gun.  I inked up the Stampin Up Print Pattern background stamp with an old somewhat dry stamp pad.  I stamped it off the edge of the top of the card and got this subtle diamond shapes.  I really like it.  I stamped the SU Happy Birthday greeting 3 times across the bottom again going off the edge of the card.  I stitched the flowers onto the card front with crochet cotton through the cute yellow buttons I put in the centre of the flowers.   I'm submitting this card in the Come and Get Card Challenge - Off the edge and Crazy 4 Cards Challenges - no patterned paper C4C187.

Christmas Card Challenge - Sept - Focus Words

This is my card for my September Christmas Card Challenge which is Focus - Words.  I selected my designer paper from my Christmas drawer - Little Yellow Bicycle - Blue Harlequin. The diamonds in the top right hand corner are blue foiled.  I decided on a large greeting which would cover most of the card.  An easy way to do make elements the size you need is Cricut. I browsed through my cartridges and chose `Joy to the World` on the Winter Frolic cartridge. I selected a deep blue card stock based on the DP.  I cut the shadow in vellum just to provide some outline to the words. I found Kiwi Kiss matched well as the card.  I cut the DP to size and rubbed the edges on my Kiwi Kiss ink pad to get rid of the white edge. I added a length of 5/8 inch Kiwi Kiss gross grain ribbon which I taped to the back and brought the flag trimmed end to the front and adhered. I chose a large sequin which matched the foil color perfectly, then I layered a small white sequin and held it all in place with a tiny navy star brad. I placed three of them along the ribbon. I think it adds the right amount of bling.  I placed snail adhesive on the back of the blue greeting then placed it on the vellum shadow.  I then added adhesive to the back of the vellum and placed on the card front.  It makes for a non-traditional colored card but I am happy with it.