Cardmaking

These are cards for my family members who contributed to my house warming gift.

This green card stock is quite heavy and came from my sister when she would visit the USA many years ago. I call it my PeaGreen card stock.

I paired it with kraft card stock with gold foil dots on it.  That was placed at the top of the card.  

I added a length of kraft and metallic gold ribbon placed below the dots layer. 

I added a green silk flower with a gold sequin and held with a gold mini brad.

White quarter sheet insert and envelope.

Same cards design but in the tall or portrait orientation.

If it works it works and why change it.

I started with a book page that I crunched up a couple of times then flattened.   I rubbed the high points with a copper ink pad.  I let that dry completely.

I chose dark brown card base in SU Chocolate Chip.

Then a layer of brown kraft paper.

Then my book page with a silk flower accent (2 silk flowers, a copper sequin)  held in place with a copper mini brad.

I added leaves with a fine black Sharpie marker.

A quarter sheet insert in white and a white envelope.

Again, the same ingredients put into a portrait card.

This time I gave the flower a long stem and long leaves as well with the black marker.

The flower layer has a mustard velvety silk flower, then an orange one then a bright yellow handmade paper flowr with a copper mini brad.

I recycled a commercial card front.

I cut the butterfly into a 3 inch square.

I added a purple layer to a SU Gumball Green card base.

The greeting is stamped in black, punched with SU Oval then punched the scallop over from the card leftover so it matches well.  It is mounted with 3D tape.

I added stitching around the square with the fine black Sharpie marker.

We are always making cards for IWin so when they need cards we are ready.

Flooring Project - Thank You cards

I made a few Thank You cards for those who helped in this big flooring project. 

This was for the sister and her husband who came to the city to help me remove the carpet from the living room and dining room and expose the cement floor on a very hot and sweaty day.

I chose Stampin Up Rich Razzleberry card base in A2 size. I dipped into my commercially made handmade paper and cut a piece of this wax resist in teals, rich purples with swishes of gold.

I left the beautiful deckle edge on the bottom and taped it to the card front.

I stitched 3 small gold beads in the top right hand corner.

A white insert and envelope.

This card has an Old Olive card base.

I chose an origami paper front layer which was taped on.

I added a gold star sequin in the left hand corner.  To balance I added 2 square brads in the bottom right hand corner with a green one in the middle.

This paper has beautiful gold details.

This card is for the folks from whom I bought the flooring which answered all my questions during the process.

I chose a SU Kraft A2 card base for this card.

The front of the this card is a piece of botanical pressed wax paper.  A nice little flower and a piece of green leaf.  It needed to be mechanically adhered as it resisted taping.  

I wrapped a length of gold thread around the top a few times and then knotted it.  I then place the gold mini brad over the knot and pressed it through the card front. I added a gold bulb pin in the bottom right hand corner which went through the wax paper and card stock front.

A white half sheet insert to hide the metal pieces which have gone through the card stock.

A white envelope to finish it off.

This is for the flooring company which recommended the underlay which saved the project.

This card is for my niece who dropped everything on the Monday morning to pick up the 2 large rolls of underlay and deliver them to my brother in law who was going to install the floor.  Saved me a round trip to the south.

The card base is SU Always Artichoke.  I found this piece of lacy handmade paper in the stash.  Lightly glued to a piece of white card stock.  Trimmed to fit across the card front and taped in place.

I added a coordinating button with gold thread held in place with a Zot. White insert and envelope.

Started with a piece of Not Quite Navy card stock.  

Layered a piece of marbled paper in blue tones with copper accents on the card front.  I added a copper star sequin held in place with a Zot.  Then I added a coordinating bead held in place with a star copper tiny brad.

White insert and envelope. 

This is for my brother in law who installed the floor and my sister who hosted me at her house.  We did a few fun things while he was working at my place. There was a bottle of scotch delivered with the card.

I am loving the lacy curtains casting a wonderful shadow on the vinyl floor!

Birthday Cards

My Final July birthday for my niece's husband.  He celebrates the same day as Mom did when she was with us.

I chose a SU Crumb Cake A2 card base. 

I added two pieces of designer paper which measure 3 inches square. I chose coordinating designs and adhered one top left and other bottom right. 

I added an oval Kraft tag with jute tie.  To that I added a oval greeting with burgundy letters. 

I added a large sequin and gold glitter star brad in the bottom left hand corner of the greeting. It was adhered to the front of the card with 3D foam tape.

A white insert was added to the inside of the card.

This card is for one of my sister that celebrates early August so it needs to get into the mail now.

I used SU textured Lovely Lilac as the card base.

I cut a tag from Handsome Hunter card stock with the Sizzix Tag die. I embossed the bottom end of the tag with the SU Script embossing folder.

I added a piece of vellum to provide a base for the tag with judiciously placed tape.  I adhered the tag in the top right hand corner.

I added a Decorative Label greeting printed in Lovely Lilac in the top left corner adhered with 3D foam tape.  White insert in the landscape card.

Card Kit Order - Single Simple Layout

I got a call from a friend this week asking if I was still making cards and kits.  Of course, COVID has put a hold on Card Club for the last 2 years.  Beside that, I got rid of lots of supplies when I de-cluttered for moving.  Many of my card making tools are in storage.  Despite that, I said yes.  I am needing a distraction.  She was looking for 20 kits as one of several activities for some down time for women attending camp this summer.  The kits needed to be simple and need few tools to assemble. These need glue, scotch tape and scissors. My Stampin Up card stock cupboard is full so that was good.  I had basic punches, ribbon, brads, and decorative paper.

I decided that all the greetings would be the SU Modern Label punch with a Word Window punchies of color printed greetings on white card stock.  I printed some Early Espresso, Black, and Night of Navy.

I decided that I would make the kits flexible so they could be orientated in tall (portrait) or wide (landscape). These 2 samples, instruction sheet, and extra greetings are being delivered in the bag. I have varied the decorative paper and coordinated the card base colors, the ribbon, and accents.  All the cards will be different.

In this sample the card base is Real Red, the grosgrain ribbon is Real Red. 

The designer paper is Twitterpated.

The scallop circle and Modern Label punchies are Basic Gray. 

The circle punchie is Whisper White.  

I added a red foil star to the accent adhered with a Zot.  It is adhered to the card front with a medium Zot.  

The greeting is adhered with 3D foam tape.

The card is an A2 card which measures 4.25 x 5.5 inches. 

On this sample the decorative paper is kraft with gold foil polka dots.  

The card base is Soft Suede as well as the grosgrain ribbon, the scallop circle punchie and the Modern Label punchie.  

The white greeting is a Word Window punchie.  

The star on the scallop circle is a gold sequin.

The card has a white bond paper insert and a white A2 envelope.

Birthday Cards

I made a few cards for my upcoming family birthdays.

I started with a card base in Not Quite Navy. 

I printed the sail boat from the Sail Away stamp set on Whisper White in black.  I used the Stampin Up Watercolor Wonder Crayons to color the image.  Night of Navy for the water, Not Quite Navy for the sky and Cherry Cobbler for the sails.  It was trimmed to 4.00 x 5.25 inches.

I printed the greetings in black on white card stock.

I flagged the right hand end of the greeting and mounted on the card front with 3D foam tape.

I chose a Soft Sky card base. I added a layer of Old Olive at 4.00 x 5.25 inches.  

I printed the grove from the Lovely as a Tree stamp set in black on white. 

I watercolored the image with Not Quite Navy for the sky.   A mixture of Always Artichoke and Garden Green for the grass and the trees. 

The image was trimmed to 3.5 x 5.00 inches and adhered to the green layer.

I printed the greetings in black on white card stock.

I trimmed the greeting and mounted on the card front with 3D foam tape.

I chose a Stampin Up Kraft card base.

I printed the Canada Goose from the Wetlands Stamp set in black on white card stock.

I mixed a color to match the Kraft card base which I used for the body of the bird, a lighter version for the breast and some greener version for the grass.

I printed the greetings in black on white card stock.

I chose the same color mixed earlier to shade the edges of the flagged greeting.  It was mounted to the card front with 3D foam tape. 

A couple of these off to those who are celebrating in July.

Birthday Tag

I made a tag for a joint gift for my niece who has a birthday in April.

I started with the QuicKutz Sewing Machine 4x4 thinlit.  The die cuts all the pieces which needed to be assembled.  It meant cutting once for each of the 4 colors - the body of the machine from olive green, feed dog plate, pressure foot and buttons in black, the other adjustment buttons in taupe, the spool of thread in black and red.  

I placed a piece of packing tape on a hard surface and slowly placed the pieces in place sticking them to the tape.  Once all the pieces were in place I used an exacto knife to trim the excess tape from around the outside edges of the die cut.

I then cut the tag with the Tim Holtz Cabinet die one kraft embossed with the SwissDots folder and one ivory.  I used the Crop a dile to make a hole in the top.  I adhered the sewing machine die cut to the tag with 3D foam tape.

I ran a length of red twine through the hole and it's ready to be attached.

The HB diecut was received in a swap so I have no credits.

It is very cute but a lot of work which explains this is the first time I have used it.

Ready 2 Go All Occasion Stack Kit - Set 02

Hexagon Trio

I chose an ivory card.

I wrapped the ivory grosgrain ribbon across the designer paper and taped ends to the back.  Adhered it to the card front.

I adhered the 3 hexagons to the bottom half of the card below the grosgrain ribbon.

I assembled the greeting by adhering the greeting to the colored circle then to the scallop circle.  The whole greeting was then adhered over the grosgrain ribbon with 3D foam tape.

Masculine DSP Split

I selected a kraft colored card.

I chose a designer paper by Creative Imaginations featuring stars.  I cut it to 4.00 x 5.25 then cut again at 3.5 inches.  Turned the small over and tape to 2 pieces back together.

Wrapped the designer paper layer with ginger grosgrain ribbon and taped the ends to the back.  Adhered to the card front.

Assemble the star accent and adhered to the front with 3D foam tape.

Nature Sticker

I layered the nature sticker onto coordinating card stock and trimmed leaving a narrow border.  I added 3D foam tape to the 4 corners on back.

I adhered an embossed layer leaving a small border to the card front.

Adhered the strip of black card stock onto the embossed layer.

I adhered the nature sticker to the card front.

I added the aligned on the black strip

Exchange Cards

I decided on hexagons for this month's exchange cards.

They are cut with the Spellbinder Nestabilities set.   I chose a true blue card base in the landscape orientation.

I added a length of red grosgrain ribbon wrapped toward the top of the card.

I added 3 blue hexagons adhered along the ribbon.  I chose one red hexagon and a greeting.  The greeting is color printed and punched with the Stampin Up Modern Label.

I chose a kraft gate fold card base and included an ivory insert.


I used the Stampin Up Wonder Watercolor crayons to add some texture to the card front.  I used Riding Hood Red, Always Artichoke and More Mustard.  The color was applied with a natural sea sponge.

I mounted 3 hexagons with the adhesive on the left hand side so the card will still open.  They were cut from warm tones card stock.

These are off to my card exchange partners.

Ready2Go Christmas Stack Kit - Blue & Cream Dove and Peace on Earth

I worked on a Christmas Stack kit in case someone wants to get a head start on those cards.

The image is a recycled Christmas card featuring navy, light blue and cream.

I added a light blue layer of card stock to repeat that color which was cut to 4 x 5.25 inches leaving a small border.

I chose a cream card in the tall orientation.

These layers were all adhered to the card front with the light blue first and the dove next.

I created a greeting with the Stampin Up Artisan Label punch.  I used the navy and light blue in teh greeting, color printed it and then punched it out.

It was adhered to the card front with 3D foram tape aligned on the dark/light line on the dove layer. 

This is another recycled Christmas card layer. 

I cut the black layer to 4 x 5.25 inches leaving a small border of card base showing.

I chose Kraft card stock to repeat the kraft colored swirls on the right hand side.

The Peace on Earth layer was adhered to the black layer then I used 3 round tiny brads in the top left, bottom left and bottom right corners.  A push pin was used to make the holes before the brad was inserted.  I selected 3 of the dots in the design for the star brads.

The 3D foam tape was cut in 4 pieces and placed on the 4 corners of the black layer.  It was then adhered to the front of the card.

A quarter sheet insert was used in these cards.

Loving how this one came together.

Gold Polka Dot HB

I made this card for my aunt who is celebrating a birthday this week.

I started with this die cut which I used a while back.  It goes really well on a 5x7 large card. The die is the Sizzix Flower, Leaves & Stem #4 which I cut the from black card stock. 

This is my last metallic Prima Flowers from my stash.  I guess I will have to cut them from now on.

I started with a black card scored and folded. 

I added a layer of gold polka dots on kraft designer paper from Recollections.

I added the die cut flower, the gold metallic, the small die cut all held in place with a gold mini brad.

I adhered the stem below the flower then added a ripped piece of black card stock to represent dirt.

R2Go All Occasion Stack Kit - Set 05

I cut the flowers from black card stock.

I selected designer paper and coordinating card stock for the base.  It was cut to leave a small border.  I adhered the DSP to the card front.

I then aligned the flower and and stem onto the card front. Once happy, I adhered the flower then the stem and trimmed it to the edge of the card.

I made a hole in the center of the flower with a push pin.  I placed the flower sequin then the handmade flower by Prima onto the tiny black brad and placed the prongs through the hole and press them apart on the inside of the card.

 This set features black and white printed elements.  The images were downloaded from Pixabay. They were printed onto white card stock then they were punched with a 2" circle punch.

I chose designer paper which would coordinated with the elements and then cards in black, white or kraft.

Once the desinger paper was adhered to the card front I wrapped a piece of black knitting ribbon around the card front and knotted it.

The element is created when the white circle is adhered to the black Stampin Up Deco Label die cut.  The label is then adhered over the ribbon with 3D foam tape.

 This card features a large metallic copper diecut daisy done with the Sizzix Daisy #4 die.

I chose designer paper and card stock combinations that worked well together.  The DSP is cut to leave a small border then adhered to the card front.

I tack the copper daisy lightly with adhesive.  This time because I have no greeting I swung the stem to the center.  I used a push pin to create a hole in the center of the flower.  I placed the teal and copper flowers onto the tiny copper brad and pressed it through the hole I made. Spread the prongs on the inside.

Check the kit tab for availability.

Card Club - November - Kraft Tag

I started with the kraft and red glitter tag.  I added a red satin ribbon.

I chose a dark brown card base and added an embossed layer.  The white card stock layer was created with the Stampin Up Petals a Plenty folder and leaves a small border of the card showing.  The embossed layer is adhered to the card front.

The tag was adhered to the embossed layer then a tiny red brad was placed through a hole made with a push pin. The prongs were spread apart on the inside of the card.

I created the greeting by printing it on white card stock and punching them out with the SU Modern Label punch.  I added a red glitter label which was cut in half crosswise and adhered behind the greeting offset on the left and right.  The greeting is adhered to the card front with 3D foam tape.

Christmas Card Order - Manger #1

I received an order for Christmas cards recently.  The client created her own manger sentiment of the inside so she wanted card fronts that would speak to the child born in the manger.

This is a Holy Family decor set I photographed at a garden center several years ago.  I love the monochromatic feel to the image.  I printed it onto white card stock but decided after ward I wanted it warmer.  Out came the Tim Holtz Antique Linen Distress Stain and I applied it along the border and it was just what I needed.  I trimmed the image along the thin border then adhered it to a dark warm green card.  I was fortunate that the figures were quite tall so I placed my greeting along the bottom edge of the card front.  I punched a Stampin Up Modern label punchie from dark grey green and an ivory greeting with the SU Word Window.  These were adhered together then mounted to the card front with 3D foam tape.

I pulled out my trusty Bethlehem image for this one.  I added a starry night and made all the elements the same color, Cherry Cobbler.  I printed it onto a quarter sheet of white card stock, trimmed it to leave a small border and adhered it to the card front of a red card.  I had left space in the top right hand corner for a large gold confetti star which was adhered in place with a Zot.


I made some of the same design in Night of Navy.

This stained glass nativity is one of several I own.  I added a tealight behind the arch background as it was designed. I photographed it against a white background.  I was able to play with the image in post production to have several different colors.
I created the layer as a 3.5x5 photo with the greeting below.  I cut a layer of gold card stock to leave a small border and adhered it to the front of a kraft colored card.  
The nativity was trimmed to make it 3.5x4.75 inches and it was adhered to the onto the gold layer.
I added a strip of the gold card stock over the line between the image and the greeting.

Card Club - June - Polka Dots Birthday

I chose a kraft card.  I matched it with polka dot designer paper which was cut to leave a small border.  I cut an ivory greeting label with the Stampin Up Apothecary label.  I then stamped the greeting from the For a Friend stamp set with a warm green ink pad.  I pulled the caramel seam binding ribbon through the holes of the label and wrapped around the DSP layer.  I placed 3D foam tape behind the label and attached to the DSP layer leaving enough ribbon on the right to make a bow.  I adhered the DSP layer to the card front. I tied the bow and trimmed the ends with scissors.

Banner & Squares

I started with a navy card. 
I added the greeting layer from this card club card.  I punched four large 1.5" squares from the decorative card stock.  I adhered them inside the printed square.  I cut a banner hole with one of the framelits from the Bitty Banner set just below the greeting.  I placed a scrap of decorative paper behind the greeting layer allowing it the show through the banner shape. 
I adhered the banner cut out over the junction of the four corners in the center of the printed square.

Card Club - May - Layered Squares

This card features layered squares.  I punched the squares with a Creative Memories 1 1/4 & 1 1/2 inch Double Square Paper Punch, which makes even borders really easy.  The smaller one is cut from the decorative card stock and the larger one from coordinating red paper. The patterned square was adhered onto the larger solid red square leaving an even border.  I created the taupe parchment layer with the square and greeting printed in navy.  This layer is adhered to the kraft card front.  I adhered four squares into the printed square.  I adhered a fifth square place on the diagonal in the center of the 4 squares. This one is adhered with 3D foam tape.  I flagged both ends of a half inch strip of the decorative card stock and adhered it below the greeting.  This makes a cool masculine card.

All Occasion Cards - Canvas Butterfly

I made a set of cards for the family who are grieving the loss of a husband, father, and grandfather.

The colors in the paper allowed me to use several card colors (kraft, royal blue and sage green) to provide some variety in this set of very simple cards. They can be used as needed at this difficult time.
The designer paper was cut to 4" square then ripped leaving a smaller and a larger piece. The piece with the white paper edge was ripped again to remove the white paper edge.  I adhered the pieces to both ends of the card leaving the card color showing in between.
I adhered the canvas butterfly over this space held in place with Zots. The design is versatile in that it works in the wide or tall orientation.

Sympathy - Canvas Butterfly

This is a sympathy card for a friend who lost her husband Ray this week.  I'm attending his funeral today and we will celebrate his full life of 93 years.

I spread some Tim Holtz Faded Jeans Distress Stain onto my acrylic plate then just pressed the kraft card front onto it to create a mono print.
I created the tag by cutting a strip of navy card stock to 2" wide and punched the end with the Stampin Up Banner Triple Punch.  The kraft layer was cut to 1.5" and punched the same way.  These were adhered together. I stamped the sentiment from the SU Simply Sketched stamp set in SU Night of Navy ink.  I adhered the canvas butterfly above the sentiment with Zots. I punched a hole in the upper left hand corner and added a cotton string matching the butterfly.  The tag is adhered to the card front with 3D foam tape.

Submitting to the following challenge:
Tag You're It Challenge #45

Card Club - April - Masculine

We have a masculine card next.

The bird images are from Graphics Fairy.  They were printed onto kraft card stock. A layer of solid card stock was then trimmed to leave a small border.  The piece of caramel seam binding is taped to the back of the colored piece then adhered to the kraft card front.  Then the left hand piece of ribbon is pulled across to the right and the bird layer is adhered over it to the left side of the card with 3D foam tape.  The seam binding is then knotted and the ends trimmed.










The second card has a green layer and greeting.  I did not align my ribbon to allow me to tie a knot so I just cut them at an angle.  I added a small oval greeting in the top right hand corner.

Card Club - November - Christmas Tree DSP Split

This is a designer paper split.  I cut the DSP at 4.00x 5.25 inches.  I printed the greeting on the back of the top half then cut the paper at 3.5 inches from the bottom.  When I turned the smaller piece over there was the greeting.  I added a metallic gold and kraft ribbon over the join and taped the ends to the back of the layer.  This was then adhered to the green card front.  I added a green Christmas tree brad on the right hand side which holds everything together. 







The DSP had two color variations some with green trees and the other with grey trees. I chose a grey card and I had to come up with a different accent for the grey paper so I chose a silver snowflake held in place with a tiny gold brad.