Sewing Project - Bag - Magenta Large

I made a shopping bag from the stitched piece I worked on a while back.  Thought it would be a cushion cover but sure the stitching would have held up. 

I folded the flower stitched piece to 12"x12" and ironed well.  I then cut a piece of white microfiber to 13.5" by 13.5". I laid the magenta piece onto the white and folded the white forwarded as a binding and sewed all the way around.  This will support the loosely woven polyester substrate flower stitched piece.  I then tacked the whole piece to ensure integrity of both layers. 

I had some gradient cotton in purples to warm pinks which worked well with the magenta piece.  I cut the outside piece 21 inches square.

I chose white microfiber for the lining. It's nice to have a light lining so you can see what is inside your bag. I cut the lining 21"W by 24"T. 

The finished size is 19" square with the handles extending 13" from the top edge of the bag.

I added a key clip and extra loop on the inside of the bag.

The straps were cut 1.5" by 42" from the magenta cotton fabric. The ends tuck into the front and back pockets and are stitched from pockets to the bag edge which distributes the load.  

After it was finished I decided that the magenta straps were too flimsy so I added some white microfiber to them as well. I cut a piece 3.25" W and 31" L. Folded in half then pressed each side in to have 4 layers in the end.  I then stitched that to the back of the cotton magenta strap.  Stronger, longer wearing and pretty. 

The front accent pocket measures 12 inches square.  The back lined pocket measures 12"Wx10"T and is split at 5 inches.

I added 3" boxed corners on the bottom.

Scan on the left or click here to find the "My Bag" line.

Oil Diffusers - Travel Case - Set 2

 This is the next set of One of a Kind Oil Diffusers in a travel case.

Just Bee - I made a bee by appliqueing 3 yellow pieces onto a black base piece of felt. I added a circle for the head which I stitched to the body. I used a piece of thin gauzy polyester fabric and cut out the wings. I satin stitched all the way around the outer edge of the wings then put some texture stitching in the wings. I stitched the wings to the body. I then stitched the bee to a piece of turquoise felt which measured about 4x4 inches.  

The back is a piece of cotton fabric which looks marbled.  I added my loop for the hanger and the yellow drop.  The 2 layers were stitched together with blanket stitch all the way around.

Follow your Heart - I cut 3 hearts in different sizes getting smaller as I went. I stitched these together with running stitch then added the 3 flowers at the top of the white one. I then stitched the whole heart to the front of a white background piece of felt measuring approximately 4x4 inches. I stitch the follow stitching in pink around the heart.

The back piece of this diffuser is cotton in a bright fuchsia color with a hanging loop and a pink drop. I chose white thread for the blanket stitch all the way around.  It comes with a travel case.

Note: The background fabric should have been a light color so it would not have darkened the white felt on the front.

Tea Time - This oil diffuser features a yellow teappot ( my favorite) which I drew then cut out of yellow felt. I place a strip of white lace along the edge of the front layer to serve as a tablecloth. I stitched the teapot onto the navy layer over the lace adding accents to it as I went.

The back of this diffuser is white felt with a navy loop and drop.  It comes with the hanger in a travel case.

Just One More Chapter - I created a small book to put on the front of this diffuser.  I chose a patterned piece of cotton and a white cotton for the inside.  I hand stitched these together, trimmed the corners and turned the piece inside out.  The book is stitched to the green backer along the spine of the book so that it opens. I put a little quote on the inside. 

The backer is yellow felt with a loop and drop.  I blanket stitched all the way around with green thread.  It comes with a hanger and a travel case.

Oil Diffusers - Hand Stitched Original Designs

I have been working on these diffusers all week.  These are all hand stitched with my original designs. They measure approximately 3.75" square. The fronts are felt with fabric as the backer.

I came up with this design to provide diffusers in a travel case. These cases are nice because they are transparent. 

The diffuser can rest in the slot and stand in your personal space to provide a relaxing scent based on the essential oil you have chosen.  The oil can be placed any where on the felt but depending on the ingredients of the oil it may discolor so I have provided a drop on the back for that situation.

I have added a loop above the drop with a small hanger so it can be hung in your personal space of horizontal space is at a premium.

They are very cute and appealing.

Art Portfolio Carry Bag

As I de-clutter I am finding pieces of art so I decided that I needed a place for those to be stored all in one place. I decided a bag to hold a mat board sandwich would work. I have a piece of mat board 32"W x 25"T.  After checking the pieces of leftover fabric stash, I had a navy piece that would work with the mat board.  When we emptied Mom and Dad's apartment a piece of batik fabric that was made by my brother in art school was returned to me so I decided that would be appropriate for this project.  I chose a couple of other colors to complement the bag.

I needed sturdy material for the handles so I chose polyester twill tape in an warm white color.  They will run the full height of the bag to distribute the weight.

I wanted a flap over the top because I did not have a zipper long enough to close the top.  By adding a piece of teal which matched the batik that worked well.

I added the piece then worked out the flap and where the bottom would be.  The bottom was just a folded edge and I thought it needed to be reinforced so I sewed a narrow strip of the navy along the bottom. I also sewed box corners to allow for the depth of my mat board sandwich.

The mat board sandwich will be 2 pieces of similar sized mat board stuck together at the bottom with duct tape. 

I will leave about an inch of tape between the 2 to allow the sandwich to grow.

It is quite big but I thought I would maximize the use of the fabric and board I had.  Maybe I am destined to do a large art piece.  The sunrise piece is quite large.

The batik piece on the front serves as a pocket.  You can see a pad of drawing paper peeking out of it in this picture.

It is quite large and should fit any type of paper pad I need should I eventually take to a class.

A button on the pocket keeps its contents in place. A twill tape loop slips over the large purple button.

All the stress point have been reinforced.

Now I needed to keep the top closed and I decided that I would use a couple of pieces of velcro 3 inches wide near the handles.  The pieces were sewn on to the front and the closing top flap.

Now, I had stitching  showing on my flap so I placed a strip of batik fabric across the flap to look pretty and cover the stitching.

Next,  I needed a visual reminder as to where the velcro was and a grabbing point to pull on the flap.  

I added 2 short loops of the same twill tape I used for the handles.

I think this bag will work well to store my art pieces and allow me to find them when I am needing one of them.

I need another piece of mat board before I can assemble my sandwich.

Happy with this project.