Showing posts with label non shed glitter. Show all posts
Showing posts with label non shed glitter. Show all posts

Tuesday, April 29, 2025

Cards - Charity - IWin

I picked up some clear butterfly stickers at Dollarama when I picked up the car today.

The card base is Stampin Up Pacific Point in the A2 size. 

I chose some Ranger Alcohol ink in red tones to match the butterfly.  I think the color is Red Pepper.  I diluted it with rubbing alcohol and spread it onto my clear embossed card stock.

I cut a strip of no shed gold glitter card stock to coordinate with the gold in the stickers.  I mounted the butterfly onto the gold strip.

Added a greeting with the SU Modern Label punchie in card base color and a Word Window punchie greeting coordinating color.  White quarter sheet insert.

This card is in the wide or landscape orientation with the Pacific Point card color with a inked clear embossed card stock colored with alcohol inks.

Another narrow strip of non shed glitter card stock.

The butterfly sticker was adhered over the gold strip.

A SU Modern Label punchie in Pacific Point with a coordinating colored Word Window greeting.

A white quarter sheet insert.



I chose SU Tempting Turquoise card base with a layer of my own paste paper cut to leave a medium border.

A strip of non shed gold glitter card stock across the top third of  the card with the butterfly stick mounted over it.

I added a Stampin Up small oval punching greeting in a coordination color.  Added a bit of blue pencil crayon around the edge and mounted with 3D foam tape.

Added a white quarter sheet insert.





This card has the same Tempting Turquoise card base with a looser pattern in the paste paper which I create myself.

Added a narrow strip of non shed gold glitter card stock adhered with double sided tape.

Mounted the blue butterfly sticker over the gold strip.

I added a Modern Label punchid in turquoise with a Word Window greeting adhered to the punchie.

Added a white quarter sheet insert.


Wednesday, March 1, 2023

Card Exchange - March - Five Petal Flowers

I used the Stampin Up Five Petal Flower punch for my March exchange cards.

I started with a Soft Suede card base A2 in portrait mode.  I cut a layer of this gorgeous screen printed handmade paper.  

I wrapped a length of Early Espresso Taffeta Ribbon on the left hand side and tape the end to the back of the decorative paper. 

The decorative paper was then adhered to the card front with double sided tape.

I created the flower accent with a pearl white flower stacked with a Cherry Cobbler one then the same flower in a smaller size punched in pearl white all held together with a red mini brad.  

The accent was then adhered to the card front with a piece of 3D foam tape.

This card is in the landscape orientation. The card base is Very Vanilla. 

I adhered a strip of the decorative paper along the left hand edge.

Then added a piece of non shed gold glitter card stock and taped that over the edge of the decorative paper and trimmed the top and bottom to the card edge. 

The accent is a square of Cherry Cobbler then a piece of decorative paper leaving a small border. 

Again the five petal flower accent was adhered on the square with 3D foam tape.

These will be off to my partners shortly.

Wednesday, June 1, 2022

Exchange Cards - June

This months exchange card feature gold non shed glitter paper and plastic daisy accents.

I chose a Real Red card base and mounted black and white designer paper to the front. I placed a black daisy plastic flower onto a gold glitter scallop circle held together with a red mini brad and attached it to the designer paper. 

I ran a length of black thread from the flower to the edge of the designer paper and taped it to the back.  I adhered this layer to the card front.   

I added a narrow strip of gold glitter paper towards the top of the card.  I mounted a Stampin Up Modern Label Punchie greeting on the left hand side over the gold strip.

For this card I swapped the colors of the plastic daisy flower to red with a black mini brad.  

I changed the orientation to portrait (tall).

The strip of gold glitter paper is wider and adhered across the bottom of the card.

I wrapped the black thread over the glitter strip.

I created the greeting with a 2 inch oval punchie layered with a solid red one which was cut in half and offset on the right and left sides.

The greetings are adhered with 3D foam tape.

I added a white insert and envelope.

Thursday, April 16, 2020

Christmas Card - Merry and Bright

I am working on May's Christmas Card challenge - large greeting.  I thought I would force myself to use this 'merry' die cut - Poppy Stamps - MAGNIFICENT MERRY die cut.  I have been working on ideas for several days and nothing is gelling.  This card is what I have so far but I think it 's missing something.

I cut it from red card stock.

I selected this striped red and green designer paper and cut it to leave a small border and adhere it to a Kiwi Kiss card base.  I have no credits for the paper.

I glued the 'merry' towards the top of the card. I added a black ampersand cut with the Cricut and the Base Camp cartridge at 1.25".  I cut the BRIGHT from silver non shed glitter paper with the Stampin Up Little Letters thin lits.  I aligned them towards the bottom of the card.  All these pieces were adhered with Scotch quick dry adhesive.

I added an accent of stars on the left in black, red, and silver all held together with a tiny red brad and adhered to the card front with 3D foam tape.  Stay tuned for another iteration.

Update: I decided overnight that it needed some black. Here's the updated version.

I think adding the star streams has saved this card.  I used a ruler and just aligned it along the Vs in the silver star and made markings to the edge of the card.

I am quite happy with it now. 

Saturday, September 1, 2018

Christmas Card Challenge - Sept - Silver Candle

The prompt for the Christmas Card Challenge is Silver Candle.

I chose to use the Tim Holtz Alterations Candlelight Bigz Die.  I cut the larger of the candles from silver non shed glitter paper. I cut the wax drips from white pearl card stock.  I cut the flame from gold non shed glitter card stock. The flame accent is cut from the pearl white card stock.  I assembled this accent with Scotch Quick Dry Adhesive.

I cut the boughs with Impression Obsession Pine Branch thin die from green and pearl white card stock.  The green was adhered to the red card then the candle was adhered over it. Then I added the pearl white and trimmed it to the card edge.

The greeting is grey printed onto a Stampin Up Modern  Label punch to which I added 3 silver rhinestones on the right hand side. It is adhered to the card front with 3D foam tape.

Thursday, August 9, 2018

HB Stripes & Glitter

I am cleaning up my desk and found this half finished card.

The card base in royal blue.  I ripped a piece of striped designer paper to about 2/3 then I finished the 4.25x5.5 inch piece with blue non shed glitter paper. This layer was adhered to the card front.  I cut the greeting with the Memory Box Jumbled Happy Birthday thin lit.  The happy in the same blue glitter paper and the other in green designer paper. These were adhered onto the striped paper.  I added 5 gold star sequins below on the glitter paper, held in place with Bling Zots.

Monday, June 1, 2015

Christmas Card Challenge - June - Nativity - Brayer - Glitter

It's time again for the June Christmas Card Challenge.  The three elements are Nativity, Brayer and Glitter.
I started by making a brayer background with several blue ink pads from light to dark.  I brayered the lightest in the center and then layered the darker colors towards the top and bottom edges. I then stamped it with a script background stamp and clear embossed it.  I then used the same stamp with navy blue ink.  I chose a medium to dark royal blue card.  I trimmed the brayer background to leave a small border.  I punched the night sky stars with a Creative Memories Star border punch.  That gave me dark stars in the sky.  I cut the nativity from pearl card stock with the QuicKutz Nativity die.  I was able to include the shepherds but not the wisemen.  I adhered the background to the card front then the nativity die cut to the background. I repeated the stars in the sky with a non shed glitter card stock cut with the Sizzix Star and Star Bursts bigz die. I trimmed away the star that came with the die cut to add a glitter star adhered with 3D foam tape.

In this close up you can see the clear embossed sections to the right of the glitter star.

Tuesday, May 26, 2015

Wedding Invite Final Design

Here's the design my friend chose for her wedding invitation!  It's a white and silver design.  I started with a white card.  I embossed a slightly smaller white layer with the mpress Karen Frame folder.  I tied a piece of silver cord around this piece just below the embossed circle frame. This layer was then adhered to the card front.  I then die cut a smooth circle from vellum with Spellbinder nestabilities.  I punched hearts from non shed silver glitter card stock.  I used the Stampin Up Sweetheart punch.  I adhered the first one on the left then adhered the right one with 3D foam tape. I now applied adhesive on the back of the vellum where the hearts covered it and adhered the layer to the center of the embossed frame.  The insert was customized with her information.
Check out the other designs here.

Monday, May 25, 2015

Card Club - May - Felt Flower & Glitter

I started with the large felt flowers which have been in my stash for a while.  The set had yellow, pink, turquoise, pink and green ones.  I matched the card color with the flower.  I chose a very blingy foil and glitter large polka dot background which was cut to leave a small border of card color adhered to the card front.  This is really nice non shed glitter card stock. It provided a nice contrast to the matte felt flower.  I just added a white silk flower in the center.  The silk and felt flowers are held to the card front with a silver brad.