Cards - Stitched on Fabric

I have been working on stitched cards for the Gallery.

The foundation layer is a piece of cotton.  I started with the mountains in coordinated fabrics then added the moon.

I added the foreground in mottled green strip of fabric then a piece of deep blue and a third piece of fabric which belong to the same fabric series as the mountains.

I added white sequins held with French Knots in the sky for stars.  Running stitch mostly with a bit of stick stitching on the deep blue strip.

Shimmery organza unto a half circle of ivory fabric in the same fabric series.

The fabric collage is stitch to the card front in a deep teal color. A half sheet white insert and envelope. 

I added a flannel foundation layer to the piece of hand dyed cotton fabric. Dyed with my sister a couple of weeks back.

The flowers base is a circle of cotton with long stitches in teal, magenta and light blue.

I colored the flower sequins with a yellow sharpie marker and put them in the center of the flower with a French Knot.  I added stems in green and a bit of dirt to ground them stitched in dark brown.

The fabric collage is stitched to the front of a Tempting Turquoise card base.

I added a half sheet white insert and white envelope.

I started the fabric collage with a piece of upholstery fabric which had organic shapes stitched in ivory thread.

I did running stitched across the background in medium blue thread.

I added French Knots on the heads of the ivory organic shapes with orange thread.

I then added a stick stitch daisy flower as a focal element.

I pinked the edges to halt unravelling.

I stitched it to the card front of a Groovy Guava card base.  Added a half sheet insert and white envelope.

I am repurposing the oil diffusers I made a couple of years ago which did not sell at the Christmas market.

I tack stitched the stitched piece to the top of a deep yellow textured card.  This is a bee with translucent wings. The edge is finished with blanket stitch.  

The diffuser drop is still on the back, so it can be removed from the card and used as a diffuser.

I added a Modern Label greeting in blue below the bee element with 3D foam tape.

I added a half sheet insert and white envelope.

I started with a piece of upholstery fabric with these embossed diamonds in it.

I followed the outline of the diamonds with stem stitch and running stitch which gives heavier and lighter outlines. The colors are pinks and purples.

I couched magenta yarn along the top and bottom edges.

The I couched white lace on the left and right hand side edges.  I added a bit of a flower focal element.

These One of a Kind cards are now in the Spruce Grove Art Gallery gift shop.  Check it out.

Thank You Cards - Finally Set 2

The card base is SU Taken with Teal in the A2 size in portrait orientation.

Trimmed the rough edges off this piece and ripped the bottom edge.

I saw flowers in the salt marks in this piece so I took my fine black marker and drew them in.

Added stems and leaves reaching to the bottom of the paper with additional grassy strokes.

It pays to save bits of ephemera.  The green yarn came in really handy.

The A2 card base is SU Pumpkin Pie with a watecolor panel marked with saran wrap on wet color and left to dry.

I punched 4 holes with the 1/8 inch punch. Two on the right and 2 on the left.  I taped the end of the green yarn found in the stash and was able string it through the holes and knot both ends.

I added a SU Artisan Label punchie colored with pencils and held on the yarn with a orange clip.

With the yarn still on my table I used in this card.

I trimmed the waterolor to crisp straight edges.

I layed a strip of double sided tape to the back of the watercolor piece.  Layed my pieces of green yarn then added another piece of ds tape and adhered it to the SU Dusty Durango card base.

Once adhered, I picked apart the strands of the yarn to create this wavy row of goodness.

I added an 2 inch oval punchie greeting below the yarn frill.

The A2 card base is SU Island Indigo.

I added a piece of SU ribbon in So Saffron and flagged the bottom end.  Trimmed the top edge to the top of the card.

I mounted the piece of rough edge watercolor panel over the ribbon aligned along the top.

Each card has a white quarter sheet insert with a white envelope.

Cards - I Win - Glitter Butterflies

I continued with the glitter butterflies today.

I chose a Stampin Up Glorious Green A2 card base.

I added 3 blocks of striped glitter designer paper and adhered them with double sided tape.

I added ribbon antennae and mounted it with 3D foam tape. 

I mounted the circle greeting just below the butterfly creating a cohesive focal element.

Added a white quarter sheet insert.

I created this card with similar supplies as the card above.

I adhered a strip of glitter striped designer paper to the top of the landscape (wide) orientated A2 card.

The glitter butterfly received its antennae of satin ribbon then was mounted with 3D foam tape along the bottom edge of the striped paper.

I punched a Stamping Up Decorative Label punchie from the striped paper then cut it in half to mounted the halves offset on the left and right.  Those were glued to the greeting punchie then the full element was mounted to the card front with 3D foam tape.

A white insert was added.

I chose SU Island Indigo as the card base for this set of cards.  Cut to A2 sized card.

I mounted a SU designer paper from the Adventure Bound DSP pad.  Trimmed to leave a small border and mounted to the card front.

I put a strip of Whisper White card stock through the Big Shot with the Swiss Dots folder and mounted that to the DSP.

The butterfly got white cotton thread antennae and was mounted with 3D foam tape.

The SU Small Oval punchie greeting was adhered with DS tape.

A white insert was added.

Another Island Indigo card base with the Adventure Bound designer paper in beautiful blue tones.

I used a SU script folder with the writing going horizontally for this card as it was in the landscape (wide) orientation.

I glitter butterfly has white cotton thread antennae and is mounted with 3D foam tape.

The SU Small Oval punchie greeting coordinating color was adhered with double sided tape.  A white insert was added.

This will be headed to my sister's this weekend and will be in then next batch of cards for IWin charity.

Cards - A7 - Bands and Ribbon

Another set of A7 cards.

I started this one with a pack of origami paper 3x3 inches with travel and writing theme.

I just selected a few and glued them down to the front of my ivory card base.

I chose a light green card stock strip to overlay on the front and embossed it with a Stampin Up Script folder.  I then used SU Tea Stain ink to highlight the writing.  I added a length of Always Artichoke seam binding which I touched with the same ink to help it fit in.  I knotted onto the strip. I adhered it to the card front with double sided tape. 

Added a white insert and an off white envelope from my stash of free ones from years ago.

This designer paper is leftover from a previous card making session.

I love the colors.  I chose a Lost Lagoon card base and adhered the designer paper cut to leave a small border.

I chose a piece of Cherry Cobbler card stock and embossed it with a Cuttlebug folder.  I knotted a length of Baja Breeze seam binding around it and trimmed the ends.

The strip was adhered to the card front in the landscape (wide) orientation.  This seems to have a bit of a Christmas vibe.

Added a white insert and off white envelope.

I started with a designer paper leftover.

I added a Stampin Up Island Indigo card base.  I trimmed the patterned paper to leave a small border and adhered it to the front.

I added a card stock strip in Pumpkin Pie and embossed it with the D'vine Swirl folder.  I rubbed the swirls with a More Mustard ink pad. 

I added a coordinating knot of satin ribbon and adhered the strip to the card front.

I finished the card with a white insert and an off white envelope.

 

Cards - Watercolor Abstract

I wanted to add some cards to my stash so I chose to reuse the bright watercolors I created in this post.

I cut the watercolor art into pieces.  In this card 4x5.25 inches.  I then used a Micron fine black marker and outlined the shapes in the watercolor.

I followed the idea of neurographic art and rounded the intersections of the black lines.  I added a border all the way around. Added circles to some of the white dots.

I used a black marker to darken the edge of the watercolor paper.

Mounted on Stampin Up Island Indigo card stock with a quarter sheet insert on the inside paired with a white envelopee.

For this card I cut the watercolor art to 3.5 inches square.

Again, added black marker lines around the shapes in the watercolor.  Soften the intersections and circled some of the dots in the art.

Added a black border all the way around.

I mounted it leaving even edges around 2 side onto a SU Gumball Green A2 card base.

Added a white insert and envelope.

This one had a good variety of colors so there was a good choice of colors for card base.

In this card, I chose SU Pacific Point in the A2 size.  These I did mount all in the portrait orientation but they could be landscape (wide) as well.

I love the bright spot of pink in this piece of watercolor. 

Again, black marker to outline the shapes in the watercolor with a border all the way around.

A white quarter sheet insert and envelope.

The card base on this card is an A2 in the SU Kiwi Kiss color.

The watercolor was cut to 3.5 inches square.

Mounted to the card front with double sided tape.  I added white quarter sheet insert and an envelope.

Pressed under books over night and is now sitting in the box.

These were fun to do and allowed my art to shine again.

 

Cards - Charity - Glitter Butterflies

I came across glitter butterfly stickers at the thrift store and decided that they would make great cards for IWin.

There was a variety to sizes so the smaller ones would be just right for A2 cards.

I chose Stampin Up Painted Blooms designer paper. I chose 4 colors of card base - Wild Wasabi, Regal Rose, Island Indigo and Blackberry Bliss.

For this card I pressed my butterfly onto a piece of Not Quite Navy card stock then cut the oval with my Creative Memories cutters.

I added an innie outie bow in Regal Rose grosgrain ribbon, and a Modern Label punchie greeting in pink.

This card features a large butterfly stuck to a white 110lb card stock. 

I chose a Regal Rose A2 card base and I added squiggles around the outer edge of the card and the oval. 

The butterfly was cut the same process as described above.

A Regal Rose grosgrain ribbon in an innie outie bow with a tiny white brad in the center.

A SU Word Window punchie greeting mounted with 3D foam tape. 

The A2 card base for this card is Stampin Up Blackberry Bliss.  

I cut a piece of the same designer paper paying attention to the color of the flowers so I had some purple ones showing.

I cut the butterfly the same way on Not Quite Navy card stock.  I added stitching around the edge with a white pigment marker.

I added a purple mini brad on the head of the butterfly to repeat the color.

The oval was mounted with 3D tape and the SU Small Oval punchie greeting as well.

It's hard to say if I like the white or colored bases for the butterflies best.

Here it was white based again cut the same way. The CM cutters are wonderful because you can see your layer and then choose from 3 different widths of borders.

Another layer of Painted Blooms DSP.

A stitched border created with a pencil crayon was a great match.

I added a piece Island Indigo satin ribbon on the butterfly oval and a layered Modern Label punchie with a Word Window for the greeting.

Each card has a white quarter sheet insert.

Cards - Christmas Cards - Trees

I have done these colorful trees on a smaller scale before.

This is an A2 card in landscape orientation.

The bottom of the card is wet with clear water and then you paint your trees above wet on dry until at the bottom you reach the puddle of water you laid earlier.

I did work out how to print the greeting on the bottom of the watercolor panel.

This is Taken with Teal with a seasonal insert and white envelope.

I think these trees are a bit too far apart but at least they are green.

The black greeting printed on the panel with the printer before mounting to card front.

Mounted on a Kiwi Kiss card base with a seasonal insert and white envelope.

Not sure how well this color works but there it is!

Black printed greeting on the watercolor panel.

Card base is Island Indigo with a seasonal insert and white envelope.

Cards - All Occasion

I wanted to finish a few more cards before cleaning up my space for company as well as use up the rest of this gold speckled paper. 

An Island Indigo card base with a piece of the gold decorative paper adhered with ds tape and glue stick.  

I added a gold fabric ribbon along the left hand edge knotted to the top of the card.

A flower element with leftover flowers from the earlier set. Cut with the Tim Holtz Tattered Flowers die.

Rust, golden yellow and blue to match the card all held in place with a copper mini brad.

White quarter sheet insert and envelope.

A masculine themed card with Not Quite Navy card base with a piece of the gold speckled decorative paper. 

A length of gold fabric ribbon tied along the top edge and knotted.

I cut a Tim Holtz mover and shaper Jalopy truck from same card stock as card and adhered with 3D tape.

A white quarter sheet insert with a white envelope.

For this card I used a SU Handsome Hunter A2 card base.

Adhered a piece of gold speckled decorative paper and trimmed the left hand side to the card edge with scissors.

Added a length of gold fabric ribbon along the fold edge of the card and knotted.

There was a star shaped hole where I had cut a shape earlier.  I cut a yellow star with the same cutter (SU Star Thinlits). It was adhered over the hold with 3D foam tape.

A white quarter sheet insert and white envelope and it is ready to give.

A bit of change of pace in color for this card.

The star was a leftover from earlier cardmaking so I mounted it to a piece of Tempting Turquoise card stock trimmed to leave a border.

I chose a bright green card base - Glorious Green I think.

I tacked the large star in Summer Sun then the small star in the same color as the blue layer. 

Made a hole in these layers and added a yellow star brad.

This layer was then adhered to the green card front.

White quarter sheet insert and envelope.

Card & Basket - Thanks

I made a large card for a group of guys who worked on my place in recent days.

I started with a half sheet card so an 8.5x11 inch piece of card stock folded in half. 

This Island Indigo - a rich deep blue. I chose to use this holey gold decorative paper and was thrilled to see the blue show through like small bits of water.

I had some satin ribbon to match. I punched 3 holes at the top and did an inny outy knot in which I captured the length of ribbon that held the star.

The yellow star is cut with the Sizzix Star Primitive #2 from Summer Sun card stock. Then embossed with the Cuttlebug Thanks Words folder trying to align the "Thank You" to be visible.  I punched a hole in the top and strung the ribbon through. It is also held in place with 3D foam tape. This was a last minute card but it worked out so well. Full insert helped to cover all the names and a white envelope.

I delivered a basket of healthy food for the guys.  

Crackers and cheese, snap peas, tomatoes and carrots. 

I did throw in a box of hot chocolate for dessert.

I lined the basket with lime green tissue paper.

The basket was a nice sturdy one with metal accents which suited the situation.

 

Card - Slow Stitching - Vine

Another slow stitch card. This fabric has a coarse weave so it was interesting stitching on it.

I started with the blue and added texture to the indigo areas with corresponding thread. 

I then did a couple of purple areas.

It still needed something so I started to add leaves and stems which became a vine.

I mounted the piece to a card base of Rich Razzleberry textured cardstock. I have started adding a piece of heavy duty double sided tape in the center.

A white quarter sheet insert and an envelope and there's another card in my box.

Card - Slow Stitching - Blue Bird

A blue bird card for my next slow stitching card.

I am still using my original slow stitching background and creating compositions to fit.

I chose some blue fabric and cut a bird and wing. The bird was just held with running stitch. A tiny bead for it's eye.

I have used jute for the branches and those were tacked in place. I added leaves. 

The piece was trimmed to 3.5 x 4.75 inches and adhered to an A2 Island Indigo card base.  It has been pressed under books to ensure it stays stuck.

Adding to my card box.

Christmas Cards - Arched Joy

Here are my first Christmas Cards for 2023.  I generally do a Christmas Card Challenge but it did not happen this year.

I used the TH Arched Frame die into which I placed the TH Joy Mover and Shaper die.  Running this combination in the Big Shot with the striped designer paper I got my main element.

I chose a designer paper with a variety of colors which allowed my to use several colors of card stock.  Top left - Handsome Hunter, top right - Tempting Turquoise, bottom left - Kiwi Kiss and bottom right - Island Indigo.

The Joy is visible against the darker card stock.   

I printed the words "to the World" on white card stock in coordinating colors and trimmed them to .75" tall and then cut the left hand end into a banner by hand.  This was mounted to the card with 3D foam tape aligned on the right hand side. 

I added a quarter sheet insert and a white A2 envelope.

Card Box - HB and Thank You

 Another couple of cards for the box.

I started with designer paper from Echo Park called Hello Spring.  I paired it with a purplish Rich Razzleberry card base.

I added a length of Island Indigo 1/4" satin ribbon along the right hand side.  Taped the ends to the back. I added three deep teal and yellow handmade paper flowers on the left side adhered with tiny yellow brads.

This layer was adhered to the front of the card with double sided tape.  This ensures nothing showing on inside of the card. 

The greeting is a Stampin Up Modern Label punchie color printed.  I added the deep purple punch split in half and adhered to the back offset a bit for it to show up.  This layer was adhered to the card front with 3D foam tape.

Ready for an August birthday.

The same paper was paired with a Rose Red card base this time.

I added a white grosgrain ribbon across the bottom third of a landscape oriented card.  Then ends taped to the back and then adhered to the card front.

I added an oval color printed greeting in Rose Red and chalked with the same color around the edges.  It was adhered to the card front with 3D foam tape.

Is resting in the Compassion House box for delivery a little later.

Birthday Card Sister

I started with a Stampin Up Night of Navy card. 
I sponged a background on photo paper with a sponge and Island Indigo ink.  I punched the bottom with the Chevron Punch.
I cut the greeting with the Memory Box Jumbled Happy Birthday thin die. Happy in Real Red and Birthday in Tempting Turquoise. 
Adhered the background then the greeting words.  I used Quick Dry Adhesive for the die cut greetings.




This is a birthday card for my sister who celebrates this week and I hope the mail system will deliver it on time.

Missed the deadline for challenge at Fab Friday but I have put the challenge graphic to show the colors.

Snowflake on Trio

I started with a Stampin Up Island Indigo card laid in the portrait orientation.  I added a narrow strip of Whisper White in the left third of the card front.  I cut 2 squares of Winter Frost DSP and layered these on squares of Basic Grey card stock.  I cut a snowflake from non shed silver glitter with the smallest on the Snow Flurry Bigz Die.  I mounted on the middle square.  I mounted the 3 squares with 3D foam tape.  I stamped the greeting with one of the stamps from the Good Greetings set in Not Quite Navy ink.

Submitting to the following challenge:
CAS colors & sketches #128
Sparkles Christmas Card - #28 Anything Goes