Card - HB - Floral Ribbon

I found this floral ribbon at the ReUse Center this week and I thought it would work for a card.

I chose to make an A7 card because it did not cut off any of the rose ovals.

I chose a SU Handsome Hunter green card base. Then I added a smaller layer of SU Rose Red card stock. Then a piece of Very Vanilla to highlight the rose ovals in the ribbon.

I painted the right hand side of the VV layer with some rose colored watercolor leaving a spot of a greeting. Once the watercolor was dry and pressed flat I adhered the pieces in the layers you see.

I stamped the greeting with SU Cherry Cobbler ink with a SU greeting stamp.

I then wrapped the ribbon along the left hand side and taped the ends to the inside of the card.   I added an insert and 5x7 inch envelope and the card is ready to go.  This is for my sister who celebrates a birthday soon.

Christmas Card Challenge - Watercolor - Doves

I created watercolor backgrounds with the intention of using these dove brads for this set of cards. The watercolor has a bit of salt technique.

The doves come in right and left facing styles. I used a Sakura GellyRoll Stardust - Clear Star gel marker for the olive branch.

The circle behind the dove is a 13/8 inch circle punchie.

The greeting is a color printed double flag end banner I designed.

This card is Stampin Up Elegant Eggplant which is a deep rich purple color.  This card is in the landscape orientation.

On this card I used Stampin Up Primose Petal for the card base as I did not have any Rose Red card stock.

The circle is Rose Red.

The greeting is also Rose Red and I chose Peace on Earth in various fonts.

You can see the Sakura Gelly Roll Stardust - Clear Star gel marker on the image on the right. 

It just adds mostly sparkle with little colors so it works well in many situations.

 

These watercolor backgrounds were created with the Stampin Up Watercolor Wonder Crayons which makes it easy to match to the card stock.  

This card had lots of salt action on the color.

The card base, the circle punchie and greeting are all Marina Mist on the left and Always Artichoke on the right.

Exchange Cards - April

We are starting a new session of card exchange.  I've decided to get my cards ready ahead of time so I will not disappoint folks when I am busy moving.

I had these silver chrome metal earrings in my stash so I off the hanger and mounted them with brads.

I chose Striped designer paper by SU in Rose Red and cut it to about 4x3 inches. I adhered it to a piece of sold Rose Red card stock measuring 4.75 x 3.5 inches. I placed pink and silver brads into the holes in the larger flowers in the metal accent.  

I strung a piece of silver cord through one of the flowers and wrapped around this layer and knotted it on the right. This layer was then adhered to the front of a Pretty in Pink card with 3D foam tape.  I added the round greeting in the bottom right hand side again with 3D foam tape.

On this card it the same layout with different colors.  The card base is Chocolate Chip.  The designer paper seems to have pink and brown lines so I chose those colors for the brads in the metal accent.

I cut the designer paper larger this time to 4.00 x 5.5 inches.  Attached the silver cord in the same way.

The greeting is punched with the Modern Label Punch in color printed in Chocolate Chip with an offset of solid card stock same as the card base. It was adhered with 3D foam tape.

Card Box - HB and Thank You

 Another couple of cards for the box.

I started with designer paper from Echo Park called Hello Spring.  I paired it with a purplish Rich Razzleberry card base.

I added a length of Island Indigo 1/4" satin ribbon along the right hand side.  Taped the ends to the back. I added three deep teal and yellow handmade paper flowers on the left side adhered with tiny yellow brads.

This layer was adhered to the front of the card with double sided tape.  This ensures nothing showing on inside of the card. 

The greeting is a Stampin Up Modern Label punchie color printed.  I added the deep purple punch split in half and adhered to the back offset a bit for it to show up.  This layer was adhered to the card front with 3D foam tape.

Ready for an August birthday.

The same paper was paired with a Rose Red card base this time.

I added a white grosgrain ribbon across the bottom third of a landscape oriented card.  Then ends taped to the back and then adhered to the card front.

I added an oval color printed greeting in Rose Red and chalked with the same color around the edges.  It was adhered to the card front with 3D foam tape.

Is resting in the Compassion House box for delivery a little later.

Farewell Card - Painted Blooms

A card for the lady who started the Welcome to my Kitchen fellowship group.  Nine of us met at her house in the fall of 2015 and brain stormed the mission, the activities, and division of responsibilities. It has been a huge success.

We have been going strong for nearly 5 years which means it is meeting a need.  I took charge of the group in 2016 when she needed more time to spend with her elderly mother.

This card is half sheet size so there is enough room for all the sentiments our ladies want to share.

I started with a 8.5 x 11 sheet of Stampin Up Soft Sky card stock which was folded in half.

I chose a sheet of the SU Painted Blooms designer paper - cut to 5.25 x 8.25 inches and adhered to the card front.

I placed a white paper doily in the bottom left hand corner, glued it down and trimmed it to the edge of the card.

I added a grosgrain ribbon in Rose Red wrapped around the card front along the fold and knotted.  Trimmed the ends.    I placed a circle of the same card stock over the doily and trimmed it again to the card edges.   I printed a sentiment banner in Wild Wasabi and Rose Red which I fussy cut to the border.  It was adhered to the card front tucking the left hand end under the ribbon.

Card Making Session - OSW Cards - Fundraiser

I have been making cards with a friend once a month.

This is a One Sheet Wonder card kit.  I brought the kit to Compassion House and these are the left overs.  The ladies there wanted the Thank Yous so I have birthday greeting in this set.

These cards are designed with the One Sheet Wonder design which makes efficient use of designer paper.  This my OSW1 layout design for 6x6 inch paper.

The greeting is from the So Happy For You stamp set in the same color as the card was trimmed with scissors to the frame. The greeting is cut to 3 inches. It was then layered onto a square of white card stock.  This layer is adhered to the card front with 3D foam tape centered on the card front.

The greetings are for these 2 card are designed with Stampin Up So Happy For You, Owl Occasions and Blooming Marvelous stamp sets.

The designer paper is from the Patterns Print III pack.














These will be in a Greeting Card Gift Set in our fundraising event at Welcome to my Kitchen.  This effort was unsuccessful as only 2 of us brought contributions.

Shower - Baby Girl Shadow Box Frame

I attended a baby shower for my nephew's daughter today.
I designed the personalized square in the center with all the pertinent details for placing into a black shadow box frame.  The information was color printed on 8.5 x 8.5 inch piece of Stampin Up Whisper White.  I chose Pretty in Pink, Regal Rose, and Rose Red as my colors as well as a bit of Basic Grey.  I added a length of Pretty in Pink 1/4″ Stitched Grosgrain in the space I had allowed on the left and adhered the ends to the back.  I punched 3 Sweetheart hearts in Pretty in Pink textured card stock.  I added 3 large buttons and 3 small buttons in the same color held in place with Zots.  The hearts were adhered with 3 D foam tape.  The 8.5 inch printed square was adhered to a piece of pink paper from the Petals & Paisley double sided designer paper set which was trimmed to 10.5 inches square.  This was then adhered to a piece of 12x12 Pretty in Pink card stock. It was mounted inside the shadow box the the back put in place. I added a length of the same ribbon to the back hangers and knotted it to hang the frame on the wall.

The mother requested books instead of cards so I chose the Velveteen Rabbit with a nice pink cover. This is one of my favorite children's book.

Card - Butterfly Thank you

This is a card made with Stampin Up product. I started with a Soft Suede card.  I added a layer of Delicate Dots DSP cut to leave a small border.  I punched top right and bottom left corners with a corner rounder.  I cut a piece of Rose Red card stock with one of the flowers from the Flower Fair framelits.  I ran it through the Pretty Print embossing folder.  I brushed the embossing with ink pad. I stamped the greeting from an unknown stamp set with Soft Suede on Whisper White and embossed with clear powder. I brushed the edges with the ink.  I cut the butterfly with the Sizzix Winged Beauties thinlit from So Saffron card stock.  I used an Aqua Painter to add the body of the butterfly with Soft Suede ink.  The greeting is adhered to the card front with 3D foam tape.
Submitting to the following challenges:
Pals Paper Arts - 254 Color Challenge

R2G Card Kit - SU For You Scallop

Another couple of kits for tomorrow.
I started with a Stampin Up Night of Navy card.  I cut a piece of Prints Designer Paper in the same color to 3"T x 4" W.  I cut a piece of white card stock to 2.25"T x 4" W.  I embossed this piece with the Cuttlebug Swiss Dots folder.  I then tape these together and trimmed as needed to create a layer which leaves a small border.  I created a strip of olive paper .75"T x 4"W, which I adhered over the join of the embossed/DSP layer. I then assembled my greeting by adhering the greeting to the olive circle then that to the scallop circle.  I cut a piece of 3D foam tape in half lengthwise and placed behind the scallop.  Removing the release paper I attached the greeting over the olive strip on the left hand side as shown. 
The other color in the kit is Rose Red.