Showing posts with label decorative label punch. Show all posts
Showing posts with label decorative label punch. Show all posts

Thursday, January 1, 2026

Cardmaking - Houses

I made house cards today. 

I am meeting with a friend next week to discuss the type of cards she would like so I thought I should make a few more samples.

I bought a set of thin dies from the big arts & crafts store last week.  They are nested and there were 3 different sets in the one package.

The set I wanted was the one that cut a square with a point on top which looks like a basic house shape. House thinlits, yeah!

The challenge is how to translate that shape.

For this card I added a triangle for the roof with was cut at 2.75" on the sides.  I made the roof green.

The house is cut from teal textured card stock. I created the window with a 1" black punchie and a 5/8" yellow one and added lines with a black fine Sharpie.   The door is cut with a rectangle thin die, glue to the house and trim to the bottom of the house. I added dots and dashes on the roof and solid lines around the edge of the teal layer with the black marker.

The house mounted to 110 lb card stock base in white.  A quarter sheet insert and a white envelope.

Another option would be a still life composition I put together and photograph.  

Then, the image is printed on 4x6" photo paper and trimmed to the right size.  For the sample I just used the house still life I did for my digital Christmas card.

I added a bit of black paper to bring out the greeting on the image.

Again, white insert and white envelope.






These are the innards of the Cricut frame houses I put on the next set of cards.

Once the frame had but used I had shapes that could be a house.

I glued the pieces to a green A2 card base. 

I outline the full house shape with the black marker which worked really well.

I used a fine black Sharpie marker to add the details to the top and bottom windows.  I added a chimney on the right hand side as well as a triangle tree.

I printed a few greetings on white cardstock in several fonts and trimmed them as needed to add to the cards. I added this one just above the door.

Another card using the innards. 

On this card I put a layer of designer paper behind the house.  

This time I put solid shapes in the windows cut from the same card stock.

Added a yellow sun in the left hand corner by trimming a yellow circle and then used the black marker to add rays.

The greeting was punched out with the Stampin Up Decorative Label and mounted above the door again.

Again, outlined the house with the black marker.

A white insert and white envelope.

These cards feature a Cricut die cut.  I spent a long time getting the shape I wanted.  Of course, I have not used the machine in at least 2 years. Fortunately, I packed everything in the box so I was not missing anything I needed. Tools, mats, and the machine.  The cartridges has been unpacked too.

Just browsing Cricut cartridges to see if there was a house shape I could use, took a while. I have been working on that for at least a month.

I chose the Wrap It Up cartridge. The image I selected is the School House. The card feature cuts this nice outline of the building.  It took about 5 test cuts from scrap paper to determine the size on the machine the get the die cut I wanted. Once, I had the size right I cut it from good black textured card stock. I cut it 6x12 inches which is the size of my mat.  I can tweak that later. 

I chose a teal card base in A2 size in the portrait orientation. I cut a piece of Stampin Up designer paper to leave a small border.  Yes, a die cut this skinny is fiddly to adhere. I used dry tape runner adhesive so I could just pick up the extra glue with my rubber erasure. Leaves no mess. 

I die cut a heart from a scrap of red card stock with the Sizzix nested thinlits. The smallest one.  I adhered that over the door.

I added a trimmed greeting along the top of the card.  A white insert and envelope for this one too.

With a change of designer paper and card base I can create a card with a totally different feel. 

This card features classic neutral colors with a hint of metallic.  An ivory A2 card base, the house outline die cut, a gold metallic heart punchie outlined with the black marker. 

The greeting banner cut the ends of the greeting and mounted it with 3D foam tape.

A white half sheet insert and white envelope.

This was a long day of fussing but I have made good notes so I should be able to recreate the Cricut cuts easily.


Tuesday, April 29, 2025

Cards - Charity - Butterflies

 More cards for the IWin Charity.

I chose the Crate Paper Designer paper which made the cut when I de-cluttered a while back because it had Stampin Up colors. Pear Pizzaz, So Saffron and Brave Burgundy.

For this card I have an A2 card base in Pear Pizzaz with a layer of DSP and a coordinating strip placed vertically. 

The greeting is a SU Decorative greeting punchie which has been warmed with the Laurentian pencil crayon - Arizona Topaz 80. Great match for So Saffron. Also I punched a green one and cut it in half and glued the halves offset at the back of the greeting.

The Martha Stewart butterfly punchie with black marker additions was adhered with a Bling Zot. White quarter sheet insert.

The other Pear Pizzaz card with a layer of DSP and a horizontal strip across the top third. 

A So Saffron Martha Stewart Butterfly punchie with black marker enhancements adhered with Bling Zot.

The greeting is a SU Small Oval punchie with a similar punchie cut in half and attached offset at the back.  The accent was then adhered with 3D foam tape.

A white blank quarter sheet insert added to the inside.
This set has So Saffron card bases in the A2 size.

This is a portrait (tall) orientation with a layer of DSP on the front then a strip of Bravo Burgundy mounted horizontally across the top third.

A yellow Martha Stewart butterfly with black marker embellishments held in place with a Bling Zot.

The greeting is a SU Modern Label punchie with a Word Window punchie embellished with the pencil crayon to warm up the white card stock.

A white quarter sheet insert added.


A So Saffron card base in the A2 size set in the wide or landscape orientation.

A strip of Pear Pizzaz card stock mounted vertically on the left hand side. 

The yellow Martha Stewart Butterfly with it's black marker embellishments attached with a Bling Zot.

The Modern Label punchie greeting this time in green with a similarly enhanced Word Window greeting with the Arizona Topaz pencil crayon.

A white quarter sheet insert.


These cards feature a Bravo Burgundy A2 card base with a layer of the designer paper adhered to the front.

A narrow strip of the deep red card stock mounted on the left hand side with a circle of So Saffron with the MS Butterfly punchie mounted onto it.  Black marker used to add the body and antennae.

The greeting is the Stampin Up Modern Label punchie topped with a Word Window greeting warmed up with a pencil crayon.  It adhered to card front with 3D foam tape.

A white quarter sheet insert.




This card is the same Bravo Burgundy card base with the designer card stock layer.

A narrow strip mounted vertically with a 1.75 inch circle punchie and a butterfly stick I found at the ReUse center the other day. Very blingy.

A Modern Label punchie with a Word Window greeting warmed up with a yellow pencil crayon which matched perfectly.

A white quarter sheet insert.

Hopefully my car will be ready to come home today after it's over night compression test.

Friday, April 18, 2025

Cards - Donation - Teachers Appreciation

I made a few cards for my niece who is working on a project for Teacher's Appreciation Day which is May 7th this year.

I dipped into my decorative paper stash and found a few pieces I could work with.

Top card is black A2 card base with a wide strip of gold card stock adhered to the card front. I then glued a black/gold decorative paper and then 2 diamond gold punchies.

Next, is black and grey marbled paper which I mounted on a Stampin Up Smoky Slate card base in the wide orientation. 

I afixed a narrow strip of the same card stock along the bottom edge of the decorative paper.

I then added 5 black round sequins onto the grey strip held in place with Bling Zots.


This card is a black card base onto which I mounted a piece of handmade decorative paper from India with silver leaf motifs.

I added a black strip of card stock along the top and then a SU Decorative Label punchie topped with a silver daisy punchie, sequin and black brad.

These were all given a white quarter sheet insert and envelope.

Sunday, June 20, 2021

Father's Day Card

These supplies are from an old card kit.

The card base is Soft Suede with a rectangular piece of teal designer paper.  It was adhered on an angle and then it was trimmed to the card edge.

I added some leaves cut with the Tim Holtz Tattered Leaves die.  Two in Soft Suede and one gold one.

I added a Stampin Up Decorative Label greeting with color printed words.  I used SU chalks to softly color the greeting in the right colors.  I punched a Soft Suede label which I cut in half and off set behind the greeting.

A card to let my Dad know how much I appreciate him.  I am so glad he is still here with us.


 

Tuesday, May 18, 2021

Seniors Week - June 7-13 2021 - Card Donations

I worked on more cards for the Seniors Week Project.

I started with the yellow and blue layer which I made last summer.  It involves making a marking tool with old toilet paper rolls to create dandelion flowers.  

That layer was trimmed to 4.00 x 5.25 inches. 

I placed a piece of blue rick rack across the bottom third and taped the ends to the back. This layer was then adhered to the front of a medium blue card base.

I added a color printed greeting punched with the Stampin Up Decorative Label adhered with 3D foam tape.

This card was created with a 4x4 photo reused from one of my photography calendars. 

I trimmed the 4x4 down a bit to leave a bit more of a border. 

I added the vellum sentiment which I adhered to the photograph with gold flower sequins held in place with orange tiny brads.  This full layer was then adhered to the front of a yellow card base.








These cards are reusing a small card I made for a Stampin up party I held years ago.  I had leftovers and they just sat. 

The accent layer has a Tango Tangerine base with Tempting Turquoise designer paper.  I added an accent strip in orange punched with the Stampin Up Dotted Scallop Ribbon border punch. 

The tag was stamped with the Too Terrific Tags set in Tempting Turquoise on Whisper White. Layer onto Tango Tangerine with a Tempting Turquoise grosgrian ribbon held in place with an orange tiny brad. 

The Whisper White layer was embossed with the Swiss Dots folder and trimmed to leave a small border. It was adhered to the turquoise card base.

The stack is growing!

Wednesday, April 28, 2021

Seniors Week - June 7-13 2021 - Card Donations

I have put together a stack of cards for a local scrapbook store - Scrap and Bean who put out the word that they were accepting donations of cards for seniors. The cards will be distributed to Senior Care Homes in the area. Seniors Week is celebrated June 7-13, 2021.

Can you do something for a senior in your sphere of influence? There are several suggestions for safely celebrating this week.

These cards are upcycling a commercial card into a new life.  It was a large card and has been transformed into 3 cards. 

For the card on the left I trimmed an area of the card to leave a good border around it.  I then punched some slots with the Stampin Up Slot punch and tied a piece of warm blue seam binding between them.  This layer was adhered to a dark purple card base.  I added a SU Modern Label punchie and Word Window greeting in the top right hand corner adhered with 3D foam tape.



For this card and trimmed the card in the same way as above.  This time I wrapped a piece of gold metallic ribbon around the decorative layer and tied a knot and trimmed the ends.  I put together another greeting with the same tools as earlier.  I matched the Modern Label punch to the card color.  Again mounted with 3D foam tape.




This 3rd card I adhered the upcycled layer to the front of a navy blue card base.  I added a Stampin Up Decorative Label punchie greeting with 3D foam tape. 

I will collect from my sister the ones she made before I deliver them.

Wednesday, September 2, 2020

Exchange Cards - September

Another set of cards with a different sheet of spattered paper made in this session. 

When I chose this paper to decorate I did not think that all the cards would have to be portrait because of the text on it.

I chose a warm red card base to match the color on the paper.  I adhered the designer paper to the card front.

I added a Sizzix Filmstrip die in glossy black to which I tied a bit of red thread. It was adhered to the card front and trimmed to the card edge. 

I added red and black sequins to the card with Bling Zots. 

I chalked the edges of the Stampin Up Decorative label greeting with warm red then I adhered it to card front in the bottom right corner with 3D foam tape.

For this card I chose a black card base.

I wrapped a length of red satin ribbon along the bottom edge and taped the edges to the back.  I tied a piece of black thread on the right hand side and trimmed the ends.

I adhered the spattered designer paper to the card front.

I added black and red sequins to the card front with Bling Zots. 

I added a Stampin Up Modern Label greeting with an offset of black label.  It was adhered to the card front in the top left corner with 3D foam tape.


Thursday, July 30, 2020

Birthday Card Mom

A birthday card for my Mom who celebrates in July.   Her favorite color is blue so I have chosen a true blue card base.

I added a layer of designer paper in coordinating colors.  I then added a strip of blue card stock and then a narrower strip of green trimmed to the card edge.

I added flower sequins with Zots and a Stampin Up Decorative Label with a circle greeting.  This accent was chalked then mounted with 3D foam tape.

Sunday, July 26, 2020

Starry Happy Birthday

I created  a birthday card for my niece's husband.

I started with a dark brown card.

I added a layer of wood grain designer paper in the landscape orientation.

I add a lots of star sequins with Bling Zots. 

I wrapped a length of gold metallic ribbon around the card front and placed the join under the greeting.

A Decorative Label punchie greeting which has been chalked with Chocolate Chip. Adhered with 3D foam tape and added a large star sequin on the corner. 

Sunday, June 21, 2020

Father`s Day Card

Update: I got the date of Father's wrong. It is on June 21st.

I used a sample from one of my card kits I made early this month.  I had to add a tree because Dad was a carpenter.

This is the Angled Rectangle layout.

I cut a tree with the Hampton Arts stamp and die set.  I cut one in green and one in grey for a highlight behind.

Adhered with 3D foam tape.  Greeting with offset is a Decorative Label punch from Stampin Up.

I am sure it arrived on time. 

I created a collage of tools for Father's Day.  I used a wood grain piece of designer paper as the background.

My Dad was a carpenter in his younger days so I associate wood with him.  I have a hand saw that means my needs, a pink hammer replaced the heavy one Dad gave me when I left home,  the green multi bit screwdriver that I have had had since I was in my 20's and other things from my tools drawer. 

I like to manage as much around my place as I can so I have acquired the tools to get the basics done. 

I appreciate my Dad very much and was not able to spend the day with him due to COVID19. I called him and had a visit.

Tuesday, June 2, 2020

Ready 2 Go All Occasion Stack Kit - Set 04

Angled Rectangle

I started with a ginger card base.

I chose designer paper by Graphics 45 - Communique Collection - On the Dot cut to 4.00x5.25 inches. I laid the designer paper onto the card front at an angle then adhere it.  I trimmed the excess to the card edge with scissors.

I cut the dark brown Decorative Label punchie in half crosswise then trimmed the points off with scissors.  I offset these behind the greeting.   The accent was then adhered to the card front with 3D foam tape.
Split Square

I cut a 4 inch square of designer paper into 2 equal triangles by cutting top left hand corner to opposite corner with a paper cutter.   These were glued to the card front aligned to the top and the bottom.   That leaves a nice band of card color on the diagonal.

I wrapped a length of white grosgrain ribbon around the card front and knotted on the front.  Trimmed the ends on the slant.

I assembled the flower accent by putting the small flower then the large flower onto the brad.  Press the prongs apart on the back.

I added the 3D foam tape to the back of the flower accent and adhered it to the card front.

A quarter sheet insert is glued to the right hand side.

 Masculine DSP Split

I selected a deep red brown colored card.

I chose designer paper by Graphics 45 - Communique Collection - On the Dot.  I cut it to 4.00 x 5.25 inches then cut again at 3.5 inches.  Turned the small over and tape to 2 pieces back together.

Wrapped the designer paper layer with brown grosgrain ribbon and taped the ends to the back.  Adhered to the card front.

Assemble the leaf accent and adhered to the front with 3D foam tape.

Ready 2 Go All Occasion Stack Kit - Set 03

Angled Rectangle

I started with a grey card base.

I chose designer paper by Creative Imaginations - Art Warehouse - Danielle Johnson cut to 4.00x5.25 inches. I laid the designer paper onto the card front at an angle then adhere it.  I trimmed the excess to the card edge with scissors.

I cut the dark green Decorative Label punchie in half crosswise then trimmed the points off with scissors.  I offset these behind the greeting.   The accent was then adhered to the card front with 3D foam tape.

Split Square

I cut a 4 inch square of designer paper into 2 equal triangles by cutting top left hand corner to opposite corner with a paper cutter.   These were glued to the card front aligned to the top and the bottom.   That leaves a nice band of card color on the diagonal.

I wrapped a length of white grosgrain ribbon around the card front and knotted on the front.  Trimmed the ends on the slant.

I assembled the flower accent by putting the small flower then the large flower onto the brad.  Press the prongs apart on the back.

I added the 3D foam tape to the back of the flower accent and adhered it to the card front.

A quarter sheet insert is glued to the right hand side.

 Masculine DSP Split

I selected a kraft colored card.

I chose a designer paper by Creative Imaginations featuring stars.  I cut it to 4.00 x 5.25 then cut again at 3.5 inches.  Turned the small over and tape to 2 pieces back together.

Wrapped the designer paper layer with ginger grosgrain ribbon and taped the ends to the back.  Adhered to the card front.

Assemble the star accent and adhered to the front with 3D foam tape.

Friday, May 29, 2020

HB Paper Strips Card - Stash Busting

I made this card for my brother that is celebrating a birthday next week.

Still stash busting paper strips of designer paper.  I chose colors to coordinate with the terracotta colored card. I just laid the first one starting in the top left corner the placed the others perpendicular to those.

The greeting is a Stampin Up Decorative label punchie with color printed words.  Adhered to card front with 3D foam tape.  I chalked the edges to match the card.

It will be on it's way today.

Tuesday, August 20, 2019

2019 Cardmaking - CH - Class 8

I really never know how many participants I will have when a do a class. By using the same layout from class to class I can prepare kits ahead of time and any left overs can be used the next month. Generally, I will not see the same ladies next month so it is always new for them.

I am using the DSP Split layout for my card making at Compassion House.  It is where a 4.00 x 5.25 inch piece of double sided designer paper is cut crosswise at 3.5 inches and the small piece is flipped over and taped back to the other to create a full layer for the card front. A variety of accents is then applied.  It is a very versatile layout.


The designer paper used  here is Rememberance Three - Rememberance collection by Authentique.

I used Kiwi Kiss card stock as a base.

Very Vanilla grosgrain ribbon.

I printed the greetings in Bravo Burgundy in Very Vanilla then punched them with the Stampin Up Decorative Label punch.  It is adhered over the ribbon with 3D foam tape.


Same layout again.

Designer Paper is Elegant Print / Poised Purple in the 29th Street Market collection by My Mind's Eye.

The ribbon is Very Vanilla grosgrain.

Three daisy confetti with flower sequins and coordinating tiny brads.

This layout generally can be flipped to the wide orientation depending the pattern.

The designer paper is by Jessica Swift - Blend - Division of Anna Griffin.

White grosgrain ribbon.

Prima handmade paper flowers in sunshine yellow with gold flower sequins and orange tiny brads.





Love this color combo. 

Card Base - Textured Basic Grey card stock.

Designer Paper - Honey Moon - Yours Truly Collection  by Echo Park.

Ribbon: White Grosgrain

Greeting: Color printed greeting in Basic Grey and punched with 1 3/8 in circle punch.  Adhered to card with 3D foam tape.


The ladies are always so appreciative to have some social time and an activity to keep their hands and minds busy.



Tuesday, October 9, 2018

Cardmaking - CH - Class 2

Style 3 -  Square - The designer paper chosen is Stampin Up Autumn Spice.  The card color selected is Old Olive. The designer paper was cut to 4 inches square.  The edges were rubbed with an Early Espresso ink pad. It was adhered to the card in a portrait orientation.

The buttons are from Stampin Up and matches the card color. I tied a length of Early Espresso thread through the button which was knotted and trimmed.

The greeting was color printed in Cajun Craze and clear embossed.  They were cut apart to 1" tall.  I ripped the top and bottom edge.  It is held in place with Zots. Once placed the button was adhered with a large Zot to the left of the words of the greeting.






Style 2 - DSP Split - I chose cool colored designer papers.  The 4 inch x 5.25 inch piece is cut at 3.5 inches then the 2 pieces are taped back together.

I added a piece of white grosgrain ribbon across the join and tape the ends to the back of the layer.  I created an accent of silk flowers starting with a tiny pink handmade paper one on the white brad, then the aqua one, a raspberry colored one, then the final large white one.  A hole was made through the designer paper layer with a push pin, the prongs were pushed through and the prongs spread apart on the back.

The layer was then adhered to the front of a deep burgundy card.

The greeting was printed on white card stock, punched and it was adhered to the card front with 3D foam tape.  The card works without a greeting as well.

Style 1 - Ripped 4 inch - The designer paper is cut to 4 x 5.25 inches.  It is ripped and the pieces are positioned to the edges leaving the orange card showing in between.

I chose a butterfly accent color printed and punched with the Stampin Up Decorative Label.  The colors on this one is Tango Tangerine and So Saffron.  This label is adhere to the card front with 3D foam tape.

I had 7 ladies in the class tonight.  They had a good time.  A couple of the girls had experience which was very nice.

Perfect as all kits are used and I can move onto another sketch for the next class.




Tuesday, September 18, 2018

Card Making - 3 Styles

When designing cards for this class at Compassion House I chose versatile designs where different paper, card stock and accent would create a different card.

Style 1 - Ripped 4 inch - The designer paper is cut to 4 inches square.  It is ripped and the pieces are positioned to the edges leaving the yellow card showing in between.  I chose a butterfly accent color printed and punched with the Stampin Up Decorative Label.  The colors on this one is Old Olive and So Saffron.  This label is adhere with 3D foam tape.


 Style 2 - DSP Split - I chose warm colored designer for fall cards.  The 4 inch x 5.25 inch piece is cut at 3.5 inches then the 2 pieces are taped back together.

I added a piece of ivory grosgrain ribbon across the join and tape the ends to the back of the layer.  I created an accent of silk flowers starting with a tiny yellow handmade paper one on the gold brad, then the orange one, another yellow, a deep rust one then the final large yellow one.  A hole was made through the designer paper layer then the prongs spread apart on the back.

The layer was then adhered to the front of a deep brown card.

The greeting was printed on tan card stock and it was adhered to the card front with 3D foam tape.  The card works without a greeting as well.



Style 3 -  Square - The designer paper chosen is Stampin Up Autumn Spice.  The card color selected is More Mustard. The designer paper was cut to 4 inches square.  The edges were rubbed with an Early Espresso ink pad.

The buttons are from Stampin Up and matches the card color. I tied a length of Early Espresso thread, knotted and trimmed.

The greeting was color printed in Cajun Craze and clear embossed.  They were cut apart to 1" tall.  The end was flagged with scissors.  It held in place with Zots. Once placed the button was adhered with a large Zot to the left of the words of the greeting.

Thursday, July 26, 2018

Cards - Teal Paisley

I chose this paisley designer paper featuring some cool colors.  It has some pink, fucshia, teal, green, and mustard.  I chose a deep teal card base.

I added a piece of designer paper leaving a small border on the card front.

I added a strip of vellum on the left hand side and it is held in place with a dark pink, light pink flowers with a teal brad in the top left hand side.

I added a Stampin Up Decorative Label stamped with a birthday greeting from the SU Sincere Salutations in Marina Mist ink.  The punchie is mounted with 3D foam tape.

I added another handmade paper flowers combo in the bottom right hand corner.



This card has no greeting.  I have added a grey Knitting Ribbon in a bow at the top third of the card.

I added a ripped piece of vellum on left side.

An accent of handmade paper flowers held in place with a teal brad.

I ripped the designer paper leaving a strip of the card base showing.

I added a blank card insert.

Monday, October 23, 2017

Card Club - October - Blue Bird

I chose the decorative layer first. I then chose a navy blue card with a coordinating blue grey layer which was cut to leave a small border.

I wrapped a piece of blue trim across the front of the bird decorative layer and taped the ends to the back.  This layer was then adhered to the card front.

I placed the white silk flower in the top right hand corner.  Using a push pin I created a hole through the card front for the brad. I placed the blue flower then the white flower onto the blue brad then the prongs were inserted through and pressed apart on the inside of the card.

The greeting was color printed in navy onto white card stock then punched with the Stampin Up Decorative Label punch. I placed 3D foam tape behind the greeting lengthwise as to not interfere with the trim.  The greeting was adhered over the trim in the center of the card.

Monday, May 29, 2017

Card Club - May - Bright Blossom

This is a nice bright card.  It features clear embossed designer paper from a 12 x12 card stock pad by SEI - Bright Blossom.  The blossom paper was cut 4x4 which yielded 9 pieces.  I chose a solid pink card stock which coordinated, which was cut to 4.00 x 1.25 inches.  These were butted up and tape together on the back to make one piece to cover the yellow card front leaving a small border.  I did do the alternate colors where the card was pink and the ribbon was yellow.
The ribbon was pulled across the designer layer and the ends were taped to the back.  This layer was then adhered to the card front.
The greeting has a solid layer which is offset behind the white color printed greeting.  The label is the Decorative Label punch by Stampin Up.  The solid label is cut across on the center point.  The point is then cut off both pieces. The halves are adhered behind the greeting offset on the left and right hand sides.  This greeting was then adhered to the card front over the ribbon with 3D foam tape.

Wednesday, March 22, 2017

Floating Balloons Card

I made this accent for photography project earlier this week.  You can check my Flickr photo stream for more info.  It reminded me of the movie UP.

Now, I could make a card out of it.

The original element was created with 10 balloons made with the Martha Stewart punch.  I chose red, yellow and blue.  I attached them to a quarter sheet of vellum.  The central yellow balloon has red spatters on it.  The first 7 balloons were attached directly to the vellum and the last 3 were adhered with 3D foam tape.  I attached white thread strings to several of them. 

For the card I trimmed the vellum down to about 3 inches wide to allow more of the sky card stock to show.  I placed adhesive behind the balloons.  I chose a Stampin Up Decorative Label greeting in a blue matching the balloons.  This was adhered with 3D foam tape to the card front with the middle points aligned along the edge of the vellum.  I placed some adhesive for the vellum where it would be hidden by the greeting.   This is off to one of my card exchange buddies.