Showing posts with label embossing powder. Show all posts
Showing posts with label embossing powder. Show all posts

Wednesday, November 1, 2017

Christmas Card Challenge - Nov - Navy Square

This is my card for the Christmas Card Challenge this month.  I have chosen Navy and Square for this card.

I chose a navy card.  I created a vellum greeting layer with a frame where the greeting is placed at the bottom of frame replacing the line. I printed it then embossed with gold powder.  It was trimmed to leave a small border of navy.

I cut the holy family with the Penny Black Manger thin die from gold card stock.

The frame was cut from white card stock with the Stitched Square Frames by Die-Namics.  I adhered the frame on the diagonal to the vellum then placed adhesive behind the frame on the back of the vellum to ensure that the adhesive does not show through the vellum.  The vellum was then adhered to the card front.

I then placed the gold holy family die cut in the center of the diamond square and attached it with a tiny gold star brad in the center of the star of the die. I have over 100 cards in my box so I am ready to start addressing.

I have posted an alternative with a clear vellum and banner greeting which was adhered to the card front with 3D foam tape.

Thursday, June 29, 2017

Strong Coffee Glittered

I use large greetings quite often so I really liked this layout when I saw it the other day.

I chose a scrap piece of designer paper.  I cut it to 3.5 inches square then cut it in half diagonally. I chose a  golden yellow card and glue a triangle in the top left and the bottom right corners. 

I chose one of the greetings from the Verve Stamps Rise and Shine Digi set which was available for download during the Spring Blog Hop.  I sized it so that it would be most of the card front and printed it on vellum.  I embossed it with Jeweled Gold embossing powder.  I trimmed it close to the greeting then layered it onto a piece of teal card stock which coordinated with my designer paper.  These are held together with 2 glittered gold star brads.  The element was adhered to the card front with 3D foam tape. 

I tried several options to add a mug to the design but there was nothing that worked. 

Submitting to the Coffee Loving Cardmakers Summer Blog Hop.