Showing posts with label men's shirt. Show all posts
Showing posts with label men's shirt. Show all posts

Tuesday, March 12, 2024

Sewing Project - Book Sleeve - Pin Stripe




I chose 100% cotton fabric from a men's shirt for the outside of this bag/sleeve.  Really nice crisp fabric.  I chose black thread for this project.

I created some cotton poly fabric from some of squares I got from the box of fabric donated to me.  I used 4 squares and sewed them together staggering the seams and then trim the excess and added it back to the length to get what I needed.  

I cut all my layers the same size 12 inches wide and 19 inches tall.  Pin Stripe outer fabric, flannel, and black taupe patterned fabric I made. The stitching I did to attached the flannel to the outer fabric was a rectangle on the front and back about 2 inches away from the edge.

I created my handles from the cotton poly fabric squares of the patterned fabric.  I cut a stripe then folded the edges into the center then ironed it half again.  I placed 4 lines of stitching both outer edges and then 2 in the middle. The handles measure 1.25 inches wide and were cut to 12 inches long.

Tacked the handles and black elastic in place then placed the bags one inside the other and sewed the top edges together leaving a gap to turn it inside out. Turned right sides out and ironed flat then pushed the lining into the bag.  I top stitched the top very close to the edge then added another line of stiching 1/2 inch from the top.

I chose a beige button but I would have preferred a gold one.










For information on the "My Bag" Line

Monday, October 22, 2018

Red Denim Snug Half Apron

I started with an extra large red denim men`s shirt.  I paired it with a small amount of red and white small print 100% cotton fabric.

I cut the shirt straight across under the arm holes. 
I measured 6.5 inches from the side seam and trimmed the buttonhole and button pieces off the shirt. I hemmed the sides of the apron with a wide hem.

I created a waist band from the denim and sewed that onto the top edge of the apron leaving about .5 inch beyond the side seam.

I created a pocket which was 9 inches tall and 10 inches wide. With a snug apron the pocket needs to have some fullness in order for one to get their hand inside.   I hemmed the top edge and created 2 small pleats in the bottom edge of the pocket making it a square pocket. I sewed it onto the right hand side of the apron with top stitch.

From the print fabric I cut three stripes 3 inches wide and 35 inches long.  These when sewn together created a strip 105 inches long.  I wanted them long so they could wrap around and tie in front. I pointed the ends and sewed the strip closed leaving a space in order to turn it inside out.

I sewed the ties by aligning the center of the ties with the center of the apron. I stitched it to the waist band of the apron top and bottom.  This closed the space left to turn it over and adhered it securely to the apron.

This apron will work well for a slim person.

Sunday, October 21, 2018

Burgundy with Floral Accents Apron

This apron started with a Joseph & Fiess 100% cotton (17.5/33) men`s shirt.  I had not really thought about how it being a solid color would affect my process but the price was good so I brought it home.

Well it did.  I just could not put solid bias tape on this one.  I hit the SEESA Rummage Sale today and found the exact fabric I needed to finish this apron.

It is a floral with a grey background, white, dusty pink and burgundy flowers with gold accents.  The down side is I had to make my own bias tape so there was not savings on time with this apron but it was worth it.

I used the handmade bias tape for the round neck and arm holes.  I used the same fabric for the patch pockets. I just hemmed the open edge of the pocket. The ties were created on the straight edge of the fabric.  They were just tacked to the back of the apron so they can adjust as needed to the wearer.

The ties started out at 3 inches wide then iron flat with the seam in the center. I put a line of stitching in the center which offers a bit of structure to the ties.

Reinforced stress points on the pockets and hanging loop.

This is an XL large apron in my opinion.


Monday, September 24, 2018

Upcycled Shirt - Smock Apron

I designed a new apron to use a used men's shirt.

This is a men's large 100% cotton plaid shirt in red white and navy.  The fabric is beautiful.

I cut the neck line into a nice round ensuring that the first button was close to the neck line.  I cut the sleeves off leaving the seam on the apron.  I chose red bias tape for this project.  I then sewed on the bias tape on the neckline and the sleeves.

I used one of the long sheets to make the extra long tie which allows tying in the front to back to the back.  In some situation you may not want these ties dangling in front. It was sewn to the center of the back of the apron.

The second sleeve became 2 patch pockets on the front of the apron.  I used the last the red bias tape on the slant edge of the pocket to coordinate with the rest of the apron.  The pockets had the seam allowance ironed then it was top stitched in place below the waist tie.

This is a great apron which provides great clothing coverage, excellent pockets, and a versatile tie.

The original shirt pocket remains as well as the button down front.  This one worked out so well.  It would work for a smaller person as you will be wearing it over clothes.