Showing posts with label Dusty Durango. Show all posts
Showing posts with label Dusty Durango. Show all posts

Friday, August 15, 2025

Thank You Cards - Finally Set 2

The card base is SU Taken with Teal in the A2 size in portrait orientation.

Trimmed the rough edges off this piece and ripped the bottom edge.

I saw flowers in the salt marks in this piece so I took my fine black marker and drew them in.

Added stems and leaves reaching to the bottom of the paper with additional grassy strokes.





It pays to save bits of ephemera.  The green yarn came in really handy.

The A2 card base is SU Pumpkin Pie with a watecolor panel marked with saran wrap on wet color and left to dry.

I punched 4 holes with the 1/8 inch punch. Two on the right and 2 on the left.  I taped the end of the green yarn found in the stash and was able string it through the holes and knot both ends.

I added a SU Artisan Label punchie colored with pencils and held on the yarn with a orange clip.


With the yarn still on my table I used in this card.

I trimmed the waterolor to crisp straight edges.

I layed a strip of double sided tape to the back of the watercolor piece.  Layed my pieces of green yarn then added another piece of ds tape and adhered it to the SU Dusty Durango card base.

Once adhered, I picked apart the strands of the yarn to create this wavy row of goodness.

I added an 2 inch oval punchie greeting below the yarn frill.

The A2 card base is SU Island Indigo.

I added a piece of SU ribbon in So Saffron and flagged the bottom end.  Trimmed the top edge to the top of the card.

I mounted the piece of rough edge watercolor panel over the ribbon aligned along the top.

Each card has a white quarter sheet insert with a white envelope.

Sunday, November 5, 2023

Simple Sentiments - Photo - Set 4

I chose a Stampin Up Chocolate Chip A2 card base.

I cut a piece of Summer Sun with the Tim Holtz Cabinet die.  I used the Stampin Up Slot punch to make two slots in the round end of the die. 

I adhered the photo to the die cut then pulled the ribbon through then around the card front and back to the front.  This is a Pumpkin Pie colored ribbon.  

I then adhered the die cut layer to the card front. I pulled the ribbon taut making sure it was not twisted on the inside of the card. I knotted the ribbon and trimmed the ends. An insert and an envelope.

These photos are from my Gentle Glow Calendar. Love the bokeh backgrounds.

Here is a House Finch in the late fall with no leaves on the trees.  I chose Sahara Sand for the Cabinet diecut.  

The card base is Cajun Craze and the ribbon matched so well. It is a beautiful soft ribbon. I just had a short length so I don't know where it came from.  I am down to my last couple sheets of this great color.

Again, slots punched, ribbon threaded through, knots made and the diecut layer adhered to the front.  Quarter sheet insert and envelope.

This is a photo of the top of a metal bistro table taken at the Muttart Conservatory.  Turned out wonderful.  I love the texture and the highlighted edges of by being used over and over by customers.

I used a Brilliant Blue card base and a piece of Smoky Slate card stock for the Cabinet die cut. The ribbon is Night of Navy seam binding.

A quarter sheet insert and white A2 envelope.





Some sweet Common Conecap mushrooms taken at the park down the street.

I chose a Creamy Caramel card stock for the card base.  A Garden Green piece for the Cabinet die cut.  A piece of beige seam binding found in my box.

The assembly as previously described and it was done.  These were fiddly to assemble but I think it was worth it.

A quarter sheet insert and a white envelope.

Friday, November 3, 2023

Simple Sentiments - Photo - Set 1

I made some cards with my 4x4 photos.

These are Aspen Leaves taken at Elk Island Park in the fall.

I chose a Stampin Up Summer Sun A2 card base, scored in half and folded.

I then cut a 1/4 sheet of Brocade Blue with the Tim Holtz Cameo Frame die.

I had to trim the photo to 3.5 W x 3.75 T to fit within the score line on the die cut.  I adhered the photo with double sided tape.

I added caplets in warm gold yellow at the top and bottom. This layer was then adhered to the card front.

I added a quarter sheet insert and a white envelope.


This card features a Dandelion Seedhead with tiny water droplets from a misty morning.

I chose Winter Wisteria as the card base and Lovely Lilac as the frame layer.

I added iridescent snowflakes embellishments held in place with purple mini brads on the right and left hand side.

A quarter sheet insert and white envelope.




This card is a photo of a Palm Leaf I took at the Muttart Conservatory.  The sunshine through the lace curtains when I photographed this card makes it extra cool.

The A2 card base is SU Garden Green.

The frame layer is Gable Green.

I added leaf green star brads on either side of the frame diecut and adhered it to the card base.

A quarter sheet insert and a white envelope.


This is the very textural center of an orange Dahlia taken at the St. Albert Botanic Park.  Love the water drop in the right hand corner.

The card base is SU Ruby Red and the frame layer is Dusty Durango.

I added red caplets on the top and bottom of the frame layer.  These are easily installed with my Crop-a-dile.  The layer was adhered to the card front.

I quarter sheet insert and an ivory envelope and it is ready to go.

Note: I had to replace the photo on the card because it end up with double side tape on it.  I replaced the photo with tulips which works just fine.

Thursday, July 20, 2023

Set of Cards

I made a set of cards with one single sheet of designer paper.  The design is by graphic45 - Couture Collection - Gorgeous - I agree it is a beautiful floral paper. Rich colors and a dramatic black background.  This paper measures 12x12 inches. Cutting 4 inch strips I ended up with 6 pieces for A2 cards. With the direction of the design all the cards were created in the portrait orientation.

Next I selected card bases for these cards.  With the colors in the paper there was lots to choose from.  Finally, I chose Old Olive, Lost Lagoon, and Dusty Durango.

For card 1 I cut the layer down from the top and flipped the piece to show off the blue striped backside. I then added a strip of orange card stock across the split.

I added a Decorative Label greeting mounted with 3D foam tape. A white quarter sheet insert finished the card.

For card 2 I did the same layout but put the stripes on the bottom this time.  I laid a length of So Saffron ribbon across the split.

The base this time is Lost Lagoon.

I layered silk flowers in warm tones and a small gold sequin onto a tiny black brad to create the floral accent which I mounted on the bottom left hand side.  The brad was pushed through the designer paper keeping all layers together.

This layer was then adhered to the card front with double sided tape.

A white quarter sheet insert was added.
This is card 3.

Here I split the layer top to bottom instead of side to side. Once split I flipped the small piece and taped back the designer paper so I could handle it as a full piece.

I added a length of Apricot Appeal grosgrain ribbon over the split and taped the ends to the back.

I added a Dusty Durango butterfly accent on the bottom right side.  The butterfly was cut with the Sizzix Winged Beauties thin dies.  I used my steel plate to ensure all the tiny spaces were well cut. I wrapped black thread around the body of the butterfly and left the ends to be the antennae.  Adhered with double sided tape.

Quarter sheet insert completed the card.


Card 4 has an Old Olive card base.  

The designer paper was left at 4.00 x 5.25 inches.  

I wrapped a length of Baja Breeze ribbon across the middle and taped the ends to the back.  

I added a Artisan Label greeting with black letters which was adhered with 3 D foam tape over top of the ribbon on the right hand side.

A quarter sheet white insert completed the card.





Card 5 is similar to card three.

This time the ribbon is So Saffron which is wrapped over the designer paper top to the bottom with the ends taped to the back of the layer.

I added some Candy Dots to the left of the ribbon in pink tones to coordinate with the large flower near the bottom of the card.

A white quarter sheet insert on the inside.






Card 6 repeats the lay out of the DSP split with the striped paper on the bottom.  

A length of wide Tango Tangerine ribbon across the split with ends taped to the back.

I found 2 tiny turquoise blue buttons in my stash.  They are adhered to the ribbon with Bling Zots.

A white insert on the inside.

This makes a nice set of card with enough variety to be interesting.  Versatile in that some have greetings and others are left blank to used for any occasion.

Happy with this set which will given as a gift.