I started with the quilted heart. I started with a piece of card stock onto which I glued scraps of designer paper in Christmas colors. Once it was dry and pressed I cut the heart free hand as I did not have a die large enough. I added stitching to the heart with a black marker then embossed it with the Cuttlebug Victoria folder. I printed the stitched frame onto ivory card stock. I then put the holes in between with a push pin. I roughed up the edges with a distress tool. I layered a piece of colored card stock between the stitched frame and the card front. It's edges were distressed as well. I mounted the heart above the greeting with 3D foam tape. I added a button with green thread tied onto it, held in place with a Zot.