Card - Challenge - Chevron

I made this card for the card challenge at Daring Cardmakers - Chevron.

I printed the SU! Designer Paper from the Eventful Digital CD.  Old Olive with Marina Mist dots. I mounted the panel of DP to the card.  I cut a piece of blue card stock was glued to the card front.  I color printed the greeting then punched it out with the Decorative Label.  I then punched one from the same blue card stock.  I split it in half and mounted each half behind the greeting.  The greeting was mounted over the blue strip with 3D foam tape.

Card - Invitation Samples

I had a couple approach me to design some invitations for their 60th wedding anniversary which is the diamond anniversary.
Here's the samples they did not select. Check back later for their selection.
I selected a black card.  I embossed a white layer with the SU Elegant Bouquet folder.  I printed a 60 on to bottom right hand corner.  I glued the white layer to the card front then applied several crystal rhinestones.

This card was a white on white concept.  I started with a white card and added a layer embossed with the Cuttlebug Devine Swirl folder. The next layer was cut with one of the SU Apothecary Framelits onto which I layered 2 die cut hearts which were embossed with Cuttlebug Swiss Dots on left and Craft Concepts In Bloom on the right.  I added a crystal rhinestone on the left heart.  The framelit die cut and the hearts were raised with 3D foam tape.

I chose ivory card stock for this one.  I printed some SU! Designer Paper from the Beau Chateau series. I slipped a Cuttlebug ribbon slider in Marina Mist onto the ivory organza ribbon and wrapped it around this layer and taped the ends to the back. I added a crystal rhinestone heart onto the centre of the ribbon slider.  I color printed the "invitation" on ivory card stock and cut it with another SU! Apothecary Framelit.  It was mounted to the card front with 3D foam tape.

Here's the one they selected.

I started with a dusty lavender card.  I embossed a white layer with the Cuttlebug Rebecca embossing folder and trimmed it to leave a tiny border.  I cut a lavendar scalloped oval with a Spellbinder nestabilities.  I color printed the information in lavendar onto white card stock then cut it with the corresponding smooth ovals in the SB nestabilities. These were adhered to each other then the element was mounted to the card front with 3D foam tape.

Card - Challenge - Polka Dots

I made this card with supplies on my desk from the last card.  I made it for my group's home card challenge which Polka Dots.
I started with the designer paper, then selected the yellow card stock.  I cut the DP in half and glued them top and bottom.  I added a color printed greeting in the centre.  I added 3 small red buttons with Zots on the right hand side of the greeting.
I managed to organize this summer so I was able to go to my storage container for elements, find greetings and pull out what I had for every greetings and Voila I had what I needed.  Another piece used!!!

Card - Challenge - Thank You - Polka Dots

I made this card for Crazy for Cards - Thank You Card.
I started with the polka dot paper.  I added the yellow card.  I decided to divide the paper and cut it nearly in half and placed the smaller piece on the bottom.  I added a red strip of card stock in the space in the middle.  I chose a pumpkin orange piece for the layer for the greeting.  I rounded its corners to repeat the circle theme.  I choose a yellow button to put to the left of the Thank You.  I applied some red ink to the edges to help it stand out.

Card Club - Incentive

Here's the cards I made as an incentive for my Card Club participants.

I cut the flowers with the Cricut from various pieces of Designer Paper.  I chose subtle patterns not to detract from the design of the flower.  I chose the Cherry Blossom from the Picturesque Cartridge.  I color printed the stem and dirt directly onto the card and glue the blossoms onto the card front.  I'm really happy with the way they turned out.

Card - Thank You

I made the cards for a Thank You for the participants in my Card Club.

The technique is nature printing which is essentially taking green leaves, applying color paint and pressing those onto paper.

I mounted these onto Kraft card stock.  I have oak and aspen leaves here but I have done other leaves which will show up later.

Card Club - Sept - Handmade Paper

I started with handmade paper which was embossed with a Sizzix folder from the Fall set. I selected the card in a light blue.  I wrapped a piece of seam binding across the handmade paper and taped the ends to the back.  I glued the embossed handmade paper to the card front. I adhered to the greeting over the seam binding with 3D foam tape leaving room for the bow.  I tied a short piece of seam binding onto the longer piece creating a bow of sorts.  I chose a Designer paper which matched the card.  I added a deep blue flower cut with a Sizzix flower die. I cut the smaller flower from the designer paper. This proved to be a challenge.  Check out how I did this with a Bigz die. I color printed the greeting then punched it out with the SU Decorative Label punch.  It was applied over the seam binding.  I glued to deep blue flower to the card then applied the smaller one onto the darker one with 3D foam tape.

Card Club - Sept - Pear

I started with the pear which is a note pad.  I color printed the script background in green onto medium green card stock making it  quite subtle. I trimmed it to leave a border on a chocolate card.  I glued the pear note paper to the left edge of the background paper. I glued the brown label punch to the top right hand corner of the background piece.  I trimmed the remainder of the label off with scissors.  I glued the background piece to the card front. I tied yellow thread through the button then added a Zot. I removed the release paper from the Zot behind the button and adhered it to the label. Trimmed the ends of the thread as needed.

Card Club - Sept - HB Label

Card Club gets going today for the fall session.
I started with a Kiwi Kiss card onto which I glued a piece of Designer Paper leaving a small border. I cut the turquoise label with the TH Stylized Labels and them embossed them with the Cuttlebug Swiss Dots folder. I punched the holes on either side with the SU Slot punch.  I strung a piece of white seam binding though the holes on the label and taped the ends to the inside of the card.  I added a bit of double sided tape to the back  of the label to keep it in place on the card front.  I adhered the scallop circle color printed greeting to the label with 3D foam tape.

Card Club - Sept - Cool Paper Clip

I started with the cool paper clip for this card. I selected designer paper to go with the black clip.  I glued it to the front of a black card.  I designed the greeting panel with the words far enough apart to be easily highlighted with the paper clip. This panel is held in place with 2 tiny brads top and bottom which allows the clip to slide up and down the strip and highlight the greeting you want. I wanted the have the greeting be more isolated so I punched 2 SU Decorative Label punchies in black bond paper which are folded in half and slipped onto the arms of the clip.  The ends of the label are then glued to each other.  If you want to keep the labels in place on the card front you may add a bit of glue to them.  Great design that allows a choice of greeting.

How To: Use a Die like a Punch

I wanted to punch out this flower from Designer Paper but the shape I wanted was in a die. This was a challenge because I could not see the paper through the tool like I can on a punch. I worked it out with a bit of thinking about it.  It worked really well.

Card - Challenge - Sentiment Only

I made this card for the challenge at Holly Jolly which is Sentiment Only.   I started with the greeting being color printed on vellum then heat embossed with clear powder.  This works very well.  I found some light and dark green designer paper to put beneath the vellum onto the white card.  To hold everything together I used some red star brads.  I added a red heart punchie in the top right hand corner.

Card - Challenge - Washi Tape

 

I made these cards for a card challenge on my internet group. The challenge is to use Washi Tape.  I didn't have some in my stash so I searched the internet and found this Washi Tape Tutorial.  I made tape with double sided tape and tissue paper. I used non stick craft sheet which worked really well!

I applied my tape to black card stock in a variety of directions, shapes and sizes. It needed something to unify the pieces so I sprayed the collage with Maya Mist Snowy White which provided just what I wanted.  I cut the collage pieces with the TH Ornamental die.  I selected 2 cards which worked with the colors on the collage. I applied a silver card stock strip behind the die then added a star in the same card stock in the top left hand corner.  I added greetings in the bottom right hand corner which were applied to a SU Modern Label punchie then the accent was applied to the card front with 3D Foam Tape.  The left one is Thank which was cut with the Cricut.  Right is color printed greeting cut with the SU Word Window punch.

Card - Script Background and Fleur de Lis Accent

I made this sketch earlier and decided this was a versatile sketch so I made more in other colors.  Pink, Blue and Yellow!  I created the script background with some poetry I wrote a long time ago.  I printed it in a color coordinate with the card color.  Found some ribbon to match which is pulled through a slit in the fold.  I cut the label with one of the SU Apothecary Framelits.  I'm really happy with my purchase of these.  I punched a 1.25" circle then layered a MS Fleur de Lis punchie onto it.  This accent was then applied to the card front with 3D foam tape.  Great versatile design.

Card - Teal - Thinking of You

 I started with a deep teal card.  I placed a white layer leaving a small border.  I cut the Designer Paper with my circle cutter giving me a nice curve on the card front.  I color printed the greeting then cut it out with one of the  Framelits from the Apothecary set.  Those Framelits really let you see exactly where you are cutting!!! I had offset the greeting allowing me to place a flower accent on the left.  I used a silk flower and a teal handmade paper flower held in place with a tiny white brad.  Another card for my stash.

Card - Exchange - Poetry & Fleur de Lis

I made 2 of these for my exchange group.  I started with a green card.  I printed a poem a wrote a long time ago on heavy paper in a corresponding color.  I trimmed it to leave a nice border and glued it to the card front.  I added a warm mossy green gross grain ribbon which I pulled through a slit on the fold and taped the ends to the inside of the card.  I cut the label from the Apothecary Framelits set in a darker green. Punched a 1.25" circle in white onto which I layered a MS Fleur de Lis punchie. It was mounted to the card front with 3D foam tape.  Makes a great card for any occasion.

Photos - Canmore

I spent some time in the mountains with my sister recently.  I wanted mountain pictures to add to my portfolio and decided Canmore may provide what I needed. We stayed at a bed and breakfast on the outskirts of town.  We visited the Bow River, Gap Lake, the downtown area, the new developments with huge houses and the small towns around.  The bottom picture is from our window when we awoke one morning. How cool is that!  It was very cold and it was -5C went we got up our last morning.  Frost on the car windows.  We spent some time with 2 ladies from Australia which was very enjoyable.  Thanks to our hosts Merv & Yvonne.

Card - Challenge - Christmas Stars

I made this card for the challenge at Holly Jolly which is a Tic Tac Toe.  I chose the bottom row which is Red/Ornament/Punches.
I started with a SB 2011 Heirloom ornament die which I cut in red card stock. I embossed the ornament with the Craft Concepts In Bloom embossing folder. I cut a Sizzix silver ornament hanger and added it to the top of the ornament.  I added red crochet cotton to hang it over the dark green handmade paper background.  It was embossed with Cuttlebug Leafy Branch folder.  I added silver star sequins to the ornament and border held in place with silver star brads.  I added a white strip of card stock punched with the SU! Eyelet Border Punch on both edges.  This was adhered to the white card front.

Card - Burgundy & Navy - New Job

I made this card for a friend who is moving to a new job!  It's exciting for her and sad for me because I will see her less often.
I started with a burgundy card which is top folded.  I embossed a piece of white card stock with SU Vintage Wallpaper embossing folder then trimmed it to leave a border.  I wrapped a piece of navy seam binding across and taped the ends to the back and adhered it to the card front.  I designed the greeting with a butterfly to signify the possibilities which are coming for her.  I color printed the sentiment on white and cut it with one of the SB Smooth Oval Nestabilities dies.  I cut a piece of the same burgundy card stock with the matching SB Scallop Oval die.  I layered these and then mounted the element to the card front over the seam binding with 3D foam tape.

Card - Wedding - White on White

I made this card for my nephew's wedding.
I decided on a white on white design.  I started with a white card. I cut a SU Oval Accent die cut.  Since it is really too big for an A2 card and I couldn't emboss it completely with the Cuttlebug Victorian folder I decided to trim it to the size I could emboss it.  I left a tab on the top to fold over to the inside of the card.  I then printed the sentiment on white card stock in Taken with Teal.  I cut it with one of the Framelits from the Apothecary set from Stampin Up! I added small iridescent flower sequins to the top and bottom bumps then mounted to the card front with 3D foam tape.