Stitching - Exercise Mat

With the floor being installed I decided that I would need a mat to do exercises in the living room.  The floor is hard and provides no cushioning.

I researched options and found a large rug at IKEA which was 100% cotton and a color I could live with.  I had bought a yoga mat from my sister who had purchased it for a class and never used it again.  That provides the non slipping base for the rug.  I only do walking videos so there is not much impact exercises.

It is about 5 x 7 feet in size so doubling it up with the yoga mat would provide 3 layers of cushion.  That should be good.

I did try it for a few days until I was convinced that the idea would work.

It would really need to be solidified into a single piece now that it was folded because there were open edges which presented tripping hazards.

The blue yoga mat is just a bit smaller than the mat which is okay.

It really sticks to the floor so keeps the mat in place very well.

It is big enough to do my floor exercises and the cushion makes those comfortable.

I clipped the folded edge first for stitching.  That way any adjustment can be made on the open edges if needed.

I laid the hemmed edges opposite the fold next to each other instead of over each other to make that edge smoother.

I chose some heavy 100% cotton crochet cotton for the stitching. It is Clark's Anchor Cronita size 10 in Turquoise to add a bit of color to the mat.

I am so grateful for what I have learned on my slow stitching journey this year.  These experiences gave me confidence to know I could do this.  I found a heavy needle in my stash. 

I used a back stitch which doubled up the stitching on the back.  Hopefully that will wear better than single stitch.

Now there were a lot of inches to go about 250 of them so it was going to take a while.

The weaving of the thread was quite open considering the size of needle I was using.  The weaving was very even so I could just follow the edge of a row.

I made crosses at the corners to really tied down those thick corners.

I am very happy with my even stitching.

The turquoise color is great.

It took about 8 hours of stitching to go all the way around.

It feels and looks great!

I found a piece of webbing and a clasp to make a strap to keep it closed when I roll it up every day when I am done.

This clasp just traps the webbing in a clip on both sides so no sewing was required.

I am amazed sometimes at what I have in my stash.

It was exactly what I needed.

Everything needs a home at my house so I placed a basket on the bottom shelf of my IVAR shelving unit to hold the mat and my indoor exercise running shoes. 

That works very well tucked away in the corner of the living room.

A two week project but bodes well for regular exercise with  my walking videos now that fall is here and the temps will be cooler.

 

Apron - Cross Back Daisy

Another apron today.  I tried a new design for those who do not want ties on their aprons.

I started with this warm rust floral fabric and chose a light yellow cotton for the lining.

I used my own pattern from earlier aprons and adjusted how the straps worked.

I cut two pieces of the pattern one patterned and the other solid.  I cut them at the same time so they would be a perfect match. 

I cut the patch pockets from the remnant created where the arm hole was cut. I added an accent strip to the slanted open edge of the pockets cut from the lining fabric.

The pockets were then top stitched onto the front patterned piece.

The front and the lining were sewn together, turned inside out, and top stitched to close the gap used to turn inside out. I also placed a line of stitching from the top of bib to the bottom of the apron just left of center to secure the 2 pieces together.

The straps were cut 2.5 inches wide and about 27 inches long just to make sure I had enough.  I sewed a seam with right sides together then struggled to turn the strap inside out. I like that the seam can be placed in the back center of the strap.

I securely attached the straps to the top corners of the bib.  I decided that 22 inches between the top of bib to the edge of the back worked so I cut the strap 24 with a 1 inch overlap at each connection point.  I ensured that the straps were "crossed" then securely attached the bottom end of the strap to the back edge of the apron.

I may have to do something different for turning the straps inside out.  I think I would also like to have the apron wider so there the back edges come closer together when it is one a person.