Slow Stitching - Door Decor - Winter Snowman

The snow arrived today so it was timely that I finished my winter piece of door decor. 

I chose a snowman as the theme for this piece.  I chose a true blue piece of cotton fabric cut to 6x8 inches. I added a flannel layer and invisible stitched that to the front.  The blue fabric had thread polka dots on it so I stitched white snowflakes on those which made very regulary pattern. 

I chose white fleece for the snowman and the snowbanks. I had a die which cut a snowman but it was too big so I had to resize it to be smaller and work better in this piece.  The first snowbank was stitched on with running stitch on the left hand side.  The snowman was then stitched on with blanket stitch. The snowbank on the left was then added with running stitch.  I added brown stick arms, 3 small yellow star buttons on his belly, black French knots for the eyes and mouth, a tiny orange felt nose which was stitched with orange floss. I chose a length of yarn from my small stash and stitched a scarf right through the layers and knotted it on the front. I then fluffedout the lengths. 

I added a snowflake accent in the top left corner.  It was diecut from white felt with the Sizziz green die. I then used navy floss to add some dimension.   I added an irridescent fabric snowflake and EBead to the center to add a bit of bling.   

I added navy French knots in between the white snowflakes.

I chose a navy cotton fabric for the backer.  Cut to 8x10 inches to provide a 1/2 inch fold over to the front of the piece. That was machine stitched with folded corners this time. I added a grey twill tape hanger like the fall leaves one.

I plan to make one for the Christmas season.

Slow Stitching - No. 050 - StitchingText

K3N Cloth Tales Slow Stitching Challenge 2024

Week 50 - Stitching Text.

I chose fabric with lines I could follow.

As it is snowing heavily today that is the word I chose.

I used stem stitch. Added highlight to the lines then used a white pencil to draft my letters. Then added a snowflake in the square and offset the empty corner with smaller snowflakes.

Really happy with this one.

Self Closing Cards - Dots & Christmas

Another set of self closing cards before everything gets packed away.

This is a pretty dots one made from wall paper actually. They are macaron snacks.

There was coordinating paper so the piece of pink is wall paper too.

All adhered to a olive green card base cut 6 inches x 12 inches. Scored at 5.5 and then just less than 1" for the flap.

Double sided tape on the flap and a generous insert.

This is a Christmas Card for which I borrowed the Tim Holtz Winter Wonder die from my niece. 

I used this wonderful sparkly decorative paper as a background and cut a snowbank and punched a star from a piece of warm pearl paper.

I added the snowflake which is part of the die and place it on his belly. 

All adhered to the teal card base of 6x12 inches with a score at 5.5 inches and just less than 1" for the flap.

Double sided tape on the flap with a generous insert.

More of the sparkly paper on royal blue card base which measures 6 x 12 inches.  It is scored at 5.5 and just less than 1" for the flap.

I cut a Sizzix Snowflake #2 from silver foil card stock and layered a MS Snowflake punch on top.  It was cut from Pale Plum card stock as well as the SU Modern Lake punchie under the greeting.

There is a silver sequin in the middle and this element is adhered to the card with 3D foam tape.

Double sided tape on the flap with a generous insert.

More sparkly paper with the Sizzix Snowman and Hat die. The snowman was embossed with the coordinating folder.

I cut the hat from black card stock and added some sparkle with a gel pen.

The color on the snowman was done with Sharpies to be sure it did not rub off.

Another pearl snowbank which the same card stock as the snowman.

The card base is navy linen texture cut 6x12 inches. Scored at 5.5 and then just less than 1" for the flap.

Double sided tape on the flap with a generous insert.

Tree Scent Ornaments - Glass and Metal

I created a few unique Tree Scent ornaments but they can be used as oil diffusers in your personal space as well.

The first is a reindeer glass ornament to which I added a couple of glass beads and a grey felt ball.

The next is a snowflake ball to which I added a grey felt ball and a white bead.

The third one is a glass with gold accents snowflake.  I added a black felt ball with gold filligree accents.

The last is a fused glass star with a turquoise felt ball in the middle. Hung with metal wire.

This beautiful glass pine cone with iridescent sheen was paired with a pink felt ball and glass beads.

The metal dove carrying a peace tag was paired with a green felt ball with a green ribbon.

The cute glass snowman was paired with a turquoise felt ball and clear beads.

The white walnut was paired with a black felt ball and black beads.

Cards - Christmas - Night of Navy Snowflake

This designer paper is from the Season of Cheer collection by Stampin Up.

I cut the DSP to leave a small border. I strung these silver circles on navy crochet thread and tape the ends to the back. Then it was adhered to the card front with DS tape.

The ornaments were cut with the Gleaming Ornaments punch from silver paper and adhered behind the circles.

It makes them looks like light bulbs.

A seasonal insert and white envelope.

I was not fussy about the reverse print on this sheet of DSP so I chose the snowflake side for all these cards.

This A2 card base is Baja Breeze but it could have been Soft Sky as well.  I cut it to leave s small border all the way around.

I added an oval color printed greeting to the bottom left hand side to keep the warm blue corner visible.  It was mounted with 3 D tape.

A seasonal quarter sheet insert and white envelope completes it.

This is a similar colored layer as the previous one but on Night of Navy card base this time.


I added a Martha Stewart snowflake punchie made from 110lb card stock


I added a large blue sequin in the center. A tiny brad holds these to the DSP then that layer was adhered with DS tape to the blue card.


A seasonal quarter sheet insert and white envelope and these are done.


Glad to have a few more in the box.

Cards - Silent Auction Donation

 

I made a couple sets of cards to donate to the Silent Auction at the Gallery Holiday Party.

The first set features a chipboard deer that was stained with Tim Holtz Distress Stain - Gathered Twigs. I chose a designer paper by We R Memory Keepers - Botanical for the background.  It comes in 12x12 so I could 6 cards with the one sheet. I ripped snowbanks from textures off white card stock.  The moon is champagne card stock punched with the 1`circle punch.  The trees are created with 1) Hampton Arts Tree Art die and stamp set, with olive card stock, 2) the Memory Box Birch Tree Trio die and 3) the Stampendous Truck Tidings die set. The card base is Stampin Up Pool Party. 

The second set of cards features a chipboard snowflake.  I painted them with white acrylic paint then a coat of Pearl Finish. I chose 3 designer paper from the Stampin Up Adventure Bound paper stack.  

For the Pine Boughs set of cards I selected Early Espresso, Chocolate Chip and Baked Brown Sugar card bases. I chose a ginger colored 1/4 inch smooth ribbon. The snowflake is attached with a large clear crystal brad. The greeting is black and white with a flagged end.

For the Birch Tree design I chose Basic Grey card bases. I chose a 1/4 inch black grosgrain ribbon. Again, a clear crystal brad to attach the snowflake. The greetings were left with square corners on this set.

I added white envelopes for all 12 cards.  These were sealed in cellophane - 6 deer then 6 snowflake.

I created a structure to display the 2 sets of cards. I started with heavy red card stock with which I created a pyramid shape then added a piece of chipboard in the middle to provide support to the structure.

I added the sealed packs of cards on either side.  I created a product label to fold over the top.  I then put 2 holes through all the layers with my Crop-a-Dile.  I pulled a red metallic ribbon through the holes and knotted in on the front.

I hope that it generates a few dollars for out club.

I also donated my weaving from a Tactile show, you can check it out here.

Update: All the items sold which is very good news!

Card Exchange - Nov 2021

I am getting caught up on my exchange cards.

These are late for November.

I used the Sizzix Bigz Die -Assembly Snowman by Tim Holtz and cut all the pieces for this snowman.  The hat and eyes from black, the nose from orange, the hat band and scarf from red velvet paper, the arms from textured brown cardstock and the snowballs from white card stock.

I embossed the falling snow background with the Sizzix - Tim Holtz - Alterations Collection - Christmas - Texture Fades - Snowfall and Speckles in blue card stock.

I adhered the snowman with quick dry adhesive then mounted him on the card with 3D foam tape.  I added a prism snowflake attached with bling Zot and a SU Artisan Label greeting in the bottom right hand corner.

Exchange Cards - Christmas Cards

I am playing catch up on my exchange cards.  With Dad`s hospitalization I have spent more time with Mom which involving traveling.   These are December`s cards then I will get the November and October ones done.

I chose Stampin Up Christmas Jingle designer paper because it had a green and red side.  I decided to make A7 or 5x7 inch cards. I printed a greeting layer of Very Vanilla with greetings in Real Red and Old Olive trimmed to leave a border all the way around. I punched 14 stars out.  Then applied thin 3D tape to the bottom ones and thicker 3D tape to the top ones.  The top ones match the card base color.  I placed them in a round shape to create a wreath. I added a Real Read wide grosgrain ribbon below the wreath and taped the ends to the back.

I adhered the greeting layer to the card front and pressed them over night.  This morning I added the prism elements of a snowflake on one and a star on the other adhered with Bling Zots.  I then added a thin gold cord bow to the wreath.

These are headed to my exchange partners. 

Christmas Card Challenge - Jan - Handmade Paper

I started on my 2021 Christmas Cards. I was inspired by a photo shoot I am planning.  

I used small sheets of handmade paper in light warm blue color.  I chose a deep warm blue card base.

I color printed a star and a greeting from the Stampin Up Bright and Beautiful set in Baja Breeze.  I heated embossed them with clear powder.  I cut the stars by hand and ripped the top and bottom edges of the greeting.

I used tiny blue brads to attach the star and greeting to the sheet of handmade paper.  I added a small sequin to the star and a snowflake sequin behind the greeting.

I have four cards in the card box.

I have not used handmade paper sheets in forever.  It was nice to get some onto cards.

Card Exchange Cards

I started with a Pea Green card base. I placed a piece of organza ribbon across a strip of designer paper, taped the ends to the back then attached it to the front of the card.

I used a coordinating desinger paper which I cut square, adhered to a pink paper from the same set cut just a bit bigger.  These were adhered together then I added 2 iridescent snowflakes with pink brads.  This was adhered to the card front with 3D foam tape.

I added a Stampin Up Word Window greeting on the left with 3D foam tape.

I started with a olive green card base.

I assembled my trees by cutting the black strips and adding one to each tree with a tiny brad. The trees are adhered to the card front with double sided tape.

I used a Zot to adhere the silver stars above the tree to the card front.

Ripped a white card stock to create a snowbank.  Adhere to card front then trim it to the card edge if necessary.

Layer the white circle greeting onto the black larger circle. Add the 3D foam tape to the back and adhere to card front as shown.  

These are headed to my card exchange friends today.

Thank You Cards

This was an easy one as I cut trimmed the front of a small card and adhered it to the front of a coordinating purple card.

I love the teapots with gold accents on this image.








These pine cones images were left overs from a Christmas stack kit.

This one I added a black layer to a red card then adhered the pine cone square aligned to the left.  I added a greeting with the Stampin Up Itty Bitty Stamp set and cut with the coordinating framelits set. 

 

I chose a black card.  I layered the pine cone onto a layer of white leaving a small border.  I ripped the bottom edge.  I added a length of self adhesive lace in red below the white.   I then added the greeting  which was stamped on a Stampin Up Word Window Punchie.  I added a white tiny brad and added it to a Modern Label punchie. The greeting was adhered to the card front with 3D foam tape.

This is a refurbished card featuring a snowflake punched out with a circle.  It was added to an ivory scallop punchie.

This was layered onto a Tim Holtz label die cut in black.  It was layered onto a printed greeting layer. 

Then added to a coordinated deep rose card.

I delivered 10 cards in all today.

Thank You Cards - Corner Rounded Squares

I prepared another set of Thank You cards Compassion House.

Here I paired some corner rounded square in warm tones with an ivory printed layer and an olive colored card.

The cross on the printed greeting layer helps me align my squares.


The next set of squares were paired with purple cards.  I produced one which creates a flower with the Thank You greeting

For the last one in this group I used black and white snowflake paper. I aligned 3 of them along the top of the card. 

I placed a Stampin Up Itty Bitty Banner greeting below mounted with 3D foam tape. 

Delivered those today.

Welcome to my Kitchen

It was Welcome to my Kitchen today and a lady who now lives in a lodge was our host.  When a couple from the group visited her in the fall she asked if she could be host.  We decided to give it a try.

It was cold this morning but our plans to car pool went well. The facility has little parking but the street parking was adequate.

We had 25 ladies in attendance.  Our group is growing and meeting a need.

The food was great as usual but we increased the contributors to accommodate the amount needed for the size of the group.

Our devotion presented the principle of targeting. When in a motor vehicle we can manage obstacles by focusing where we want to be not the object in the way. 

Psalm 121 was read. We can use the same principle in our spiritual lives by focusing on the help and not our problems.  We had 6 ladies from the lodge attend some of which had connections with ladies in the regular group.  It was very good.

I have prepared a survey and I will compile the results to see where we are going with the group.

At one point this afternoon we had large fluffy snowflakes coming down on a very cold day.

I took a photo of a couple on the windshield of my car.

My macro lens did a decent job of capturing the structure. I was happy with these results.

R2Go Christmas Stack - Prism Snowflakes & Trees

I started with a navy card base.

I tacked a 4" square of vellum leaving even borders top and bottom.

I added the silver metallic ribbon wrapped around the card front and taped to the front over the vellum where the accent will cover it.

The snowflake element starts with a small white sequin then a silver fiber one, then the prism one and finally the Stampin Up Snow Flurry white one cut from card stock.  Make holes as needed in each of the snowflakes. These are held together with a navy mini brad where the prongs are spread apart on the back.

Adhere the snowflake element with the 3D foam tape.

Glue the quarter sheet insert.

I started with a warm green card base.

I assembled my trees by cutting the black strip into 3 pieces then adding one to each tree with a tiny brad. The trees are adhered to the card front with double sided tape.

Remove the star & Zot from release paper and adhere to card front at the top of the tree one at a time.

Rip the white paper to create your snowbank.  Trim it to the card edge if necessary. 

Layer the white circle greeting onto the black larger circle. Add the 3D foam tape to the back and adhere to card front as shown.  Glue the quarter sheet insert to the inside.

Thank You cards

I used left overs from my recent Ready 2 Go Cmas Stack kit to create some thank you cards. 

I chose a black card base.

I used the cut pine cone square element and added a layer of white card stock. 

I then cut a strip of left over from the back of a black and red plaid card stock.  I cut it to 4.25 inches and adhered it across the card. 

I punched a Stampin Up Modern Label punchie from the plaid leftover and ensured red on both ends.   I added a SU Word Window punch in the center. That was adhered in the top left hand corner.

I adhered the square pinecone element with 3D foam tape to the card front leave even borders on the left bottom and right hand sides.

I started with a black card. 

I added the strip of snowflake designer paper by Terese Collins on the left hand side.

I added a 1 inch strip of gold moire paper in the center of the card overlapping the snowflake layer. 

I created an accent with a square of black card stock, a 1 inch circle of gold paper, a white dove brad and a SU word window punchie.  This was adhered to the card front with 3D foam tape.

Added these to the Thank You box.

R2Go Christmas Stack kit - Pinecones & Reindeer

I cut the pine cone element with a Sizzix Squares Thinlits at about  3 inches square.  I then cut with the paper cutter a white layer at 3.25 inches. These are adhered together.

I cut black and white snowflake designer card stock into pieces 4.25 inches by 2.5 inches. The paper is by Teresa Collins - Christmas Home - Cmas Damask. This is the reverse side. I adhered the piece on the left side aligned to the edge of a black card.

I then cut a length of 6.5 inch red crimped ribbon and placed in the center of the wide card and taped the ends to the inside.

I added 3D foam tape to the four corners of the pinecone accent and adhered it to the right side leaving even border on the top, right and bottom edges.

This is the same sketch but in the portrait orientation.

The Reindeer element was cut to 3 inches and an ivory layer was cut to 3.25 inches. These are adhered together. I chose ivory to coordinate with the striped ribbon.

The striped light and dark green designer paper is by Graphics 45 from the Twas the Night Before Christmas collection. It was cut to 2.5 inches tall and 4.25 inches wide and adhered to the bottom of the green card.

The striped ribbon was cut to 6.5 inches, placed in the center of the card and the ends were taped to the inside of the card.

The reindeer element was adhered with 3D foam tape placed in the 4 corners.  It was aligned to leave an even border on left top and right hand sides.

Christmas Card Challenge - April - White Snowflake

The Christmas Card Challenge prompt for June was White & Snowflake.

I chose a white felt snowflake ornament for this card.  I cut a couple of my pieces of alcohol ink backgrounds into 2.5 inch circles to fill the snowflake center of the ornament. I added a length of Kelly Green seam binding which coordinated very well with the alcohol ink paper to the hanger.  I trimmed the ends with scissors.

I selected a turquoise card and decided it needed a bit of something before I put the ornament onto it.  I used a wavy template and followed it with a push pin making holes in the card front.  It sort of suggests falling snow. 

I added 3 large white snowflake confetti.  A couple on the ornament and one off which are held in place with light blue tiny brads.

Mosaic Monday - Christmas Decor

I spent some time at a local nursery which does up Christmas in a big way.

There must have been 40 trees set up with several types of needles. Many were green, some silver, and even a few black ones.  The ornaments came in every color of ornament possible.  Red, blue, purple, silver, lime green, and cream/ivory to mention a few.  Some of the decor was rustic with wool, wood, and natural elements; some were glitzy with silver and sparkly ornaments; and some in the traditional colors of red and green. Ribbon in wide, organza, cotton, narrow and everything in between.

Several folks were asking about clearance or sales items and there were not to be had they were told by staff.  I guess they must practice true Boxing Day specials.

The gift area carries some lovely Christmas home decor items.  I found several really nice nativities with a life sized one being featured.

Sharing with Mosaic Monday #66 hosted by Maggie at Normandy Life.

CAVA Gallery - French Cards

I am dropping off cards to the gallery again today in preparation for the Miniature Show which starts on Friday, December 1st.

Here's a card that I used some of the pieces from the card club card but included alcohol ink background instead of designer paper. 

I chose an aqua card in 4.25x 11 with top fold which highlighted another color in the snowflake accent.

I added the same white grosgrain ribbon.

I adhered the greeting punched with the Stampin Up Modern Label punch. 

I chose a warm taupe card and added a bright magenta sky decorative paper.

I cut a large star from non shed gold glitter paper and placed it in the top half of the card. 

I cut the Bethlehem with the Taylored Expressions Bethlehem Border thin lit from the same gold glitter card stock.

I added a warm sand dune in the front with was created with Tim Holtz Antique Linen Distress Stain on white card stock which was ripped.  You can see that the ripped edge is a little darker because it absorbed better there.

Another card club kit into which I added some acrylic paint paper to which added some snow with pearl paint.  It was spattered with a old toothbrush rubbed on a straight edge. It was adhered to a deep red card base.

I ripped a white snow bank and adhered it even with the card bottom edge.

I added a deep red felt tree held in place with 3 tiny gold brads which look like ornaments.  A gold star sequin is placed at the top of the tree.

I chose a warm purple card base onto which I adhered a piece of bright purple paste paper.

I added a ripped snow bank of white card stock aligned to the bottom of the card.  

The silver foil reindeer was adhered above the snowbank with 3D foam tape.  It looks black due to scanning.

The greeting was color printed in Smoky Slate and punched with the Stampin Up Modern Label punch.  I punched one from the paste paper and offset it behind the greeting.  This was adhered to the card front with 3D foam tape.

I selected an aqua card base in 4.25x11 with a top fold.  I added a piece of alcohol ink background paper with blues and purples. 

I added a metallic silver ribbon across the top third of the card and tied a square knot. 

I created a snowflake accent with a deep blue, silver and silver fabric snowflakes layered and held together with a tiny shiny silver star brad.  It was adhered to the card front with 3D foam tape.

A french greeting was added in the top right hand corner in the form of a Stampin Up Modern Label Punchie.

Snowflake Wonderland

I chose a background that I printed a long time ago.  It was trimmed to the edge of the border.

I added a large snowflake, a clear snowflake and a silver confetti flower to the center.  I chose a tiny white brad to hold it all together.  I made a hole with a push pin through just the background.  I then adhered that layer to the front of a warm dark blue card. 

Quarter sheet insert added.