Cards - A7 - Florals

I needed a distraction today so I put my hands to making some cards for my stash.

I found some A7 (5.25 x 7.25 inches) envelopes which were free when received so nice to destash.

The floral designer paper I chose is by Anna Griffin in this grey brown color cut to about 4 inches. 

The dark layer is some Early Espresso in Co-ordinations style which means it has a colored core and folding the card stock reveals that color so I used it for the layer and band instead.

The script paper at the bottom designed by Blue Fern Studios - Paisley & Vine - Bohemian. 

The card base is Stampin Up Sahara Sand.  A white sheet insert and ivory envelope.

This card has the same components.

I cut the floral paper to leave a large board all the way around then cut a Early Espresso layer leaving a narrower border.

SU Sahara Sand is the A7 card base used in the landscape orientation.

I cut a band of the dark brown card stock and flagged the end. Using 3 ivory mini brads I adhered it to the 2 other layers.

This full layer was then adhered to the card base with double sided tape.

A white insert and an ivory envelope.

For this card I chose a Stampin Up More Mustard card base to fit in an A7 envelope.

I cut the floral designer paper by Anna Griffin in the mustard color to leave a wide border all the way around.

I layered a piece of Early Espresso card stock behind leave a narrow strip on the left and right sides. These were adhered to each other with double sided tape.

I cut a strip of the dark brown card stock and then added 2 Stampin Up Five Petal punchies in the dark brown and the More Mustard colors with a tiny flower punch in the center all adhered to the layers with a More Mustard mini brad. 

A white insert with an ivory envelope.

A Stampin Up More Mustard base to fit in an A7 envelope.

The Early Espresso but to leave a small border all the way around and the mustard floral by Anna Griffin cut a bit smaller to provide an even brown border on all sides.

I added a band running top to bottom on the left hand side of the floral piece.

I punched a Martha Stewart butterfly punchie in More Mustard and adhered it to the 2 previous layers with a yellow mini brad.

This was all adhered to the card front in the landscape orientation.  White insert and an ivory envelope. 

Cards - Christmas - Red and Green Holly

I took time to make a few more Christmas cards before the craft room gets packed up to replace the flooring.

This paper is from the Season of Cheer collection.

I chose a Cherry Cobbler A2 card base and wrapped a length of Always Artichoke wide grosgrain ribbon across the paper widthwise.  Taped the ends to the back.

Adhered the DSP to the card front in the portrait orientation then mounted an oval greeting punchie over the ribbon with 3D foam tape.

A seasonal quarter sheet insert and white envelope.

My photo taking space was already put away so I had to improvise hence the lacy curtain.  Plants are usually on this space but they were temporarily displaced.

This is a DSP Split card with the same Cherry Cobbler card base.  I cut the DSP layer at 3.5 inches and flipped the bottom piece and taped them back together. I placed a red band of card stock over the join and taped it to the card front.

I added a scallop circle and color printed greeting over the ribbon with 3D foam tape.

A season sentiment on a quarter sheet insert and a white envelope.

The green color in this collection is Mossy Meadow but since I don't have card stock in that color I substituted Always Artichoke which worked well.

I wrapped the dark green grosgrain ribbon across the designer paper and taped the ends to the back.  It was then adhered to the card front with double sided tape.

I created a poinsettia accent using the 5 Petal Punch with Real Red card stock, a non shed gold glitter punchie, a red sequin all held with a gold tiny brad.

It was adhered to the card front with 3D foam tape.  Seasonal quarter sheet insert and an envelope.  Pressing over night and they are done!

Card Exchange - March - Five Petal Flowers

I used the Stampin Up Five Petal Flower punch for my March exchange cards.

I started with a Soft Suede card base A2 in portrait mode.  I cut a layer of this gorgeous screen printed handmade paper.  

I wrapped a length of Early Espresso Taffeta Ribbon on the left hand side and tape the end to the back of the decorative paper. 

The decorative paper was then adhered to the card front with double sided tape.

I created the flower accent with a pearl white flower stacked with a Cherry Cobbler one then the same flower in a smaller size punched in pearl white all held together with a red mini brad.  

The accent was then adhered to the card front with a piece of 3D foam tape.

This card is in the landscape orientation. The card base is Very Vanilla. 

I adhered a strip of the decorative paper along the left hand edge.

Then added a piece of non shed gold glitter card stock and taped that over the edge of the decorative paper and trimmed the top and bottom to the card edge. 

The accent is a square of Cherry Cobbler then a piece of decorative paper leaving a small border. 

Again the five petal flower accent was adhered on the square with 3D foam tape.

These will be off to my partners shortly.

Card Exchange - Nov - Screen Printed Paper

This sheet of beautiful screen printed paper stayed with me when many of the other 12x12 sheets left last week. 

It had so many Stampin Up colors in it. Early Espresso, Kraft, Very Vanilla, Cherry Cobbler, Soft Suede, Chocolate Chip and Melon Mambo.

On this card I cut the decorative paper to 5.25x4.00 then placed on a Very Vanilla card base. I cut the paper following the floral design from left to right. I then cut a piece of Melon Mambo to finish the rectangle along the cards bottom edge.  This was adhered first then the decorative paper over top of that leaving a small border all the way around. I added rhinestones in the center of the flowers with Bling Zots glue dots.

On this second card, I but a piece of designer paper for the top of the cards and a piece of Melon Mambo for the bottom and chose a Soft Suede card base.  

I ran my piercing wheel tool to make some wavy lines in the solid card stock on the bottom to provide texture.  I adhered that below the piece of designer paper on the top.  

I added a piece of Very Vanilla card stock across the join of these above mentioned papers and adhered it with double sided tape.

I then punched a SU Five Petal Punch flower in the pink and then the ivory card stock.  I layered these and added a small yellow flower in the center. This accent is held together with a deep pink mini brad.  The flower was adhered on the strip of paper with 3D foam tape.

These are off to my exchange partners this week.

Cards - Exchange - July

A blue and yellow theme for my July exchange cards.

I chose a golden yellow card stock and ran it through the Big Shot with the Cuttlebug Script Texture folder.

I adhered it to the a white card base.

I wrapped and knotted the blue organza ribbon around the card front and placed it along the fold on the left.

I added a focal element created from punchie flowers made with the Stampin Up Five Petal punchie from yellow and blue card stock.  I managed to find scraps of blue that matched the ribbon really well.  I added a half inch circle and a yellow mini brad in the center to hold these all together. 

The accent was adhered to the card front with 3D foam tape.

For this card all the same elements but switched orientation to a wide card.  

On hind sight maybe I should have selected a different folder for this one because the script is sideways.  It's mostly texture so I think its still works.

For the focal element I used a white flower brad for the center which brings in the white of the card base.

These will be off to my exchange partners shortly.

Cards - Acrylic Ink Backgrounds - Thanks

Another few cards with those acrylic ink backgrounds.  

This one is deep burgundy with yellow spots.

I printed the greeting from the Stampin Up You're Lovely Stamp set and cut with the Stampin up Sizzix Deco Labels Framelits Dies.  I colored with flowers with brush markers. 

This was mounted on a black card base with 3D foam tape behind the greeting.

 

 

A similar background with a flower accent.

I chose a magenta card base. 

I cut the greeting with the Cricut and the Don Juan cartridge from terracotta textured card stock.   

I punched a Stampin Up Five Petal flower from the same card stock.   I layered this with a salmon color handmade paper flower with an ivory silk flower.  It is held in place with a magenta brad layered with a flower sequin.

I chose a yellow card base for the green acrylic ink background. 

I punched 3 SU Five Petal flowers from pearl white card stock. I added pale yellow handmade paper flowers and small flower sequins.  The flowers are held in place with tiny green brads. 

The greeting is cut with the Don Juan Cricut cartridge at 1" Tall.  It is mounted with 3D foam tape.   All of these have a blank white insert.

Thank You Cards - Compassion House

I am delivering some thank you cards to Compassion House today.

Another DSP Split with an oval greeting where I offset a yellow one behind it!    Another with pink tones!

 

A recycled butterfly card which was trimmed to fit the front of the card.  A card with a bit of a masculine theme with the old Jalopy in the bottom right hand corner.

I made up some old card kits to get them out of the house.  These were originally birthday cards so I added an oval Thank you greeting with 3D foam tape and voila another card to go.  I trimmed these watercolored glitter cards to fit on the A2 sized card and layered with a colored layer onto a black card.

Exchange Cards - Catch Up

Another set of exchange cards ready to go!

I chose double sided scrapbook paper - Small Floral - For the Record by Echo Park Paper.  I paired with with three coordinating card bases - green, red and peach.

These are DSP Splits so the scrapbook paper was cut toe 4 x 5.25 inches then cut crosswise at 3.5 inches.  The small piece was turned over and taped back to the larger. I added a white grosgrain ribbon across the join and tape the ends to the back. This layer was adhered to the card front.

I used StampinUp Five Petal Punch in coordinating colors for the accent.  I added a bright green daisy confetti in the center. These are held together with a white tiny brad.  The accent was then glued to the card front with 3D foam tape.

Another thank you card for Compassion House.

Same paper on the peach card stock.  The layering is all the same.

I found a partial greeting in my stash and added the YOU by cutting letters with the Stampin Up Little Letters thinlits set from green card stock.  I glued the letters the letters in place with Quick Dry Adhesive.

These are addressed and ready for the mail.

2019 Cardmaking - CH - Class 4

I had a class tonight with the ladies at Compassion House.  I am using the Tropical Note Card stack kit.

The accent layer is glitter paper which has been painted. It was cut with the Tim Holtz Cabinet mover shaper.

The yellow was cut with the TH Cabinet die.  I added a circle punchie layered with a Stampin Up Five Petal Punch and held in place with a yellow mini brad.

The yellow layer was embossed.  I added a length of yellow fiber. 

I decided to add greetings to this set. The greeting was color printed on ivory and punched with the Stampin Up Large Oval punch. It was mounted with 3D foam tape.




The greeting on the blue one is the Stampin Up Modern Label punchie.

The purple greeting was color printed and punched with the SU Modern Label punchie.

These were printed on white & turquoise card stock respectively.

I brought this kit as well and we made most of these as well.  Great stash busting session.

Check out the details with these links Eiffel Tower  Butterfly   Bee & Flower

Ready 2 Go Stack Kit - Tropical Note Cards

I used decorative paper I made here.

I chose a turquoise card base.

I cut a yellow die cut with the Tim Holtz Cabinet Die then embossed it with the Cuttlebug Victorian embossing folder.  It is adhered to the card front aligning the bottom, left and right hand sides.

I aligned the yellow circle to the curve of the color coordinated smaller die cut which was cut with the Tim Holtz Cabinet Die Mover Shaper. Then I added the card color blue five petal flower punchie made with the Stampin Up Five Petal punch and then the silk flower.  Use a push pin to make a hole through those layers then place the yellow mini brad through it and press apart the prongs on the back of the smaller diecut. Wrap the yellow fiber around the accent below the circle, knot and trim the ends. Cut the 3D foam tape square into 5 pieces.  Place a piece in each of the four corners and one on the curve of back of the element you just created.

I have included orange and purple ones as well.