Card Making - Sets Continue

I switched the designer paper to Well Worn which gives me masculine cards for variety.

These a DSP Splits which means I cut the designer paper to 4.00 x 5.25 inches then cut again at 3.5 inches.  

This designer paper is double sided so I can just turn the small piece over and tape it on the back scotch tape and I have the same size layer to work with. on the left I add a piece of Crumb Cake card stock and a strip of Not Quite Navy.  I used my square punch to punchout some square to repeat the pattern on the left hand side of the card. I then glued a few of the small punchies on the right hand side with Bling Zots. 

Another set of cards with theWell Worn Designer Paper Set.

I cut the designer paper to leave a small border on the Crumb Cake card base.  On th left I created an accent with the Tim Holtz Bracket die in Cajun Craze, then a strip of Crumb Cake then a strip of Not Quite Navy.  I adhered these the added 3 holes. I strung some shiny cord through them and knotted it at the center front. I added a star brad through the center hole.  This accent was then adhered to the card front. On the right, I created an accent with a piece of So Saffron card stock riipped on the right. Added a strip of Cajun Craze and a narrow strip of Not Quite Navy.  I then poked holes on either side of the navy and using a large needle stitched the criss cross pattern over it with yellow yarn. 

Again, A2 size with white quarter sheet inserts and white envelopes.